i2Systems Apeiron Screw Mount LED Downlight, 3000K Warm White, White Finish, IP67, 2.5W, 90° Beam, 3.5in Round, 1.34in Deep, Removable Bezel
-
Perfect Fit, Guaranteed
Get the right part every time
-
Expert Support
Our in-house specialists know our products inside and out
-
Enhanced Value & Service
We go beyond the sale with professional and balanced services
-
Wordwide Delivery
Enjoy hassle-free worldwide delivery
Overview
The i2Systems APL-2W-30K-PW1 is a round screw-mount LED downlight with warm white (3000K) output and a white finish trim for cabins, cockpits, and other overhead locations on a boat. It draws 2.5W, throws a 90 degree beam, and measures 3.50 inches across with a 1.34 inch mounting depth, which helps when headliner space is tight.
The screw-mount design uses a removable bezel, so you can service the fixture without fighting spring clips. An IP67-rated build handles spray and routine washdowns, but it is not meant for underwater or other submersible installations.
Key features
- Warm white light (3000K) with a 90 degree beam for general downlighting and courtesy lighting
- Screw-mount installation with a removable bezel; mounting depth is 1.34 inches
- 3.50 inch round fixture size for common overhead panels and hardtop liners
- IP67 rating for wet areas and washdowns; not for submersible use
- Stainless steel construction with a titanium-coated trim bezel in a white finish
- Simple 2-wire hookup that works with existing wiring and an on/off switch; 2.5W draw per fixture
Installation and setup
Leave enough clearance behind the mounting surface for the 1.34 inch depth and for routing the two conductors without sharp bends. In wet overheads, use tinned marine wire and sealed connectors, then support the wiring so it cannot chafe under vibration.
After fastening the fixture, the bezel can be removed later for access, which is handy for refits where the headliner or overhead panel is difficult to pull down.
Where it works well on board
This style of downlight is commonly used under hardtops and arches, in cockpits, in pilot houses, and along walkways where you want warm-white illumination that feels comfortable at night. It is a good match for boats that need a shallow downlight and want to keep the existing switch circuit while upgrading to LED.
Care and cleaning
Rinse salt residue with fresh water and wipe with mild soap. Skip abrasive pads or aggressive solvents so the trim finish stays in good shape.
We ship all in-store (FL) stock orders the same day if placed before 3 PM EST, Monday through Friday. Orders placed after this time will ship the next business day. Orders fulfilled from other warehouses or manufacturers may not ship the same day. If an item is out of stock, we will notify you promptly.