Overview

The Blue Sea Systems 8089 is a C-Series plug panel kit for closing or customizing a position on a Blue Sea C-Series toggle circuit breaker panel. The panel plug is made from heavy 1/8" 5052 aluminum and finished in slate gray with a two-part polyurethane coating, and it accepts standard Blue Sea Systems backlight labels and "ON" indication LEDs.

This kit is used when a panel opening needs to stay clean and finished during a refit, a repair, or a staged electrical build. It works with Blue Sea Systems 8087 and 8088 C-Series panels, so it fits neatly into the same panel layout instead of leaving an exposed cutout.

It is a good match for boat owners and installers tidying up a helm, cabin, or service panel where one breaker space is being reserved for later use. The included hardware and blank label also make it easier to keep the panel organized and readable from the start.

Key features

• Made for Blue Sea Systems C-Series toggle circuit breaker panel layouts
• Works with Blue Sea Systems 8087 and 8088 panels
• Panel plug is built from heavy 1/8" 5052 aluminum
• Slate gray two-part polyurethane finish matches the look of C-Series panels
• Accepts standard Blue Sea Systems backlight labels for circuit identification
• Accepts standard Blue Sea Systems "ON" indication LEDs
• Lets you close an unused panel position while keeping the layout ready for future circuit changes

Compatibility and fit

This is a panel accessory for Blue Sea Systems C-Series toggle breaker installations, not a circuit breaker by itself. It is intended for panel positions that need a clean blanking plug and a matching finish, while still allowing the same style of labeling and LED indication used across the rest of the panel.

For buyers checking fit before ordering, the main point is panel family compatibility. This kit is for C-Series panel applications and is listed for use with Blue Sea Systems 8087 and 8088 panels.

Installation and setup

The kit includes the mounting screws needed to secure the panel plug, along with the LED plug and a blank label. That makes it a straightforward option when replacing a missing plug, cleaning up an older panel, or leaving a breaker position unused until a later system expansion.

On a boat, this kind of detail matters most at the helm or distribution panel where spare openings can collect dirt, look unfinished, or make the panel harder to read. Using a matching plug keeps the panel face consistent and leaves room for a later circuit addition without reworking the whole panel.

What's included

• Circuit breaker mounting screws
• C-Series panel plug
• LED plug
• Blank label