Overview

The Garmin 010-11430-00 is a quarter-turn bike mount for compatible Edge devices, built to strap onto a bicycle stem or handlebar and keep the computer in a consistent, easy-to-see position.

The mount uses a rubber disc and elastic bands, so it can be installed without clamps or tools and moved between bikes when needed. Once the mount is in place, the Edge attaches and removes with the familiar quarter-turn twist, which is handy when you want to take the head unit off quickly for charging, security, or transport.

For boat owners who keep a bike aboard for dock-to-town runs, it is a simple way to keep your Edge mounted during the ride and remove it fast before stowing the bike back on board.

Key features

• Quarter-turn attachment for quick on and off with compatible Garmin Edge devices.
• Straps to a stem or handlebar using elastic bands, with a rubber disc to help the mount sit securely on the bar.
• Works well as a spare or replacement mount so one Edge can move between multiple bikes.
• Fits many later Edge models that use the quarter-turn interface, including the devices listed in the compatibility section.
• Not compatible with Edge 205, 305, 605, or 705 models.

What’s included

• Quarter-turn bike mount
• Rubber disc
• Elastic bands

Compatibility and fit

Compatible devices include Edge 20, Edge 25, Edge 200, Edge 500, Edge 510, Edge 800, Edge 810, Edge 1000, Edge Touring, and Edge Touring Plus.

This mount uses the quarter-turn interface. If your Edge is an older 205, 305, 605, or 705 model, it uses a different handlebar mount style.

Installation and setup

Position the mount on the stem or handlebar where the screen will be easy to read. Place the rubber disc between the mount and the bar, then loop the elastic bands around the bar to hold the mount down firmly.

To attach the Edge, align the tabs on the back of the device with the mount and twist until it locks. Removal is the reverse, twist back and lift off, which makes it easy to take the unit with you when the bike is left on deck, on a rack, or at the dock.

Maintenance and care

Check the elastic bands periodically for wear and replace them if they look stretched or cracked. If the bike is stored near salt air or gets spray during transport, a quick rinse with fresh water and a wipe-down helps keep the mount and bands in good shape.