Overview

The Garmin 010-02613-00 is a BlueNet 30 Gateway that connects Garmin BlueNet network-compatible devices with a legacy Garmin Marine Network on the same vessel. It is used when you are upgrading or expanding electronics and need newer BlueNet gear to communicate alongside an existing Garmin Marine Network installation.

The gateway is powered (power cable included) and mounts in a fixed location so you can keep network cabling tidy and protected. A 2 meter Garmin BlueNet network cable is included for the BlueNet side connection.

Key features

• Links Garmin BlueNet network-compatible equipment to a legacy Garmin Marine Network for mixed-generation installs
• Supports staged electronics upgrades where older networked Garmin components remain on board
• Powered gateway format with a dedicated power cable included
• Mounting hardware included for a secure, vibration-resistant installation
• Includes a 2 meter Garmin BlueNet network cable for the BlueNet side connection

Compatibility and fit

This gateway is meant specifically for bridging Garmin BlueNet network-compatible devices to a legacy Garmin Marine Network. Before purchase, confirm that your onboard system has the two network types you are trying to connect and that you have appropriate access to each network connection point where the gateway will be installed.

Installation and setup

Plan the mounting location where both network runs can reach without tight bends or strain on connectors, then secure the unit using the supplied hardware. Provide clean DC power from your distribution panel using the same best practices you use for other onboard electronics, and keep the wiring supported so it does not work loose in chop or engine vibration.

On boats that see regular spray or washdowns, install the gateway in a sheltered electronics space and route cables so water cannot track along them into the connection area.

Use cases on board

This is a practical fit for refits where a newer BlueNet-capable component is being added while the boat still relies on an established Garmin Marine Network backbone. It also makes sense when you are expanding capabilities over time and want the network to stay functional through each upgrade step.

What’s included

• Garmin BlueNet 30 Gateway
• Power cable
• Mounting hardware
• Garmin BlueNet network cable (2 meters)
• Documentation

Maintenance and care

Periodically check that the unit is still firmly mounted and that cables have not loosened from vibration. If the boat is stored in humid conditions, a quick inspection of connections during routine electronics checks helps prevent corrosion-related issues over time.