TACO Marine Standard Outrigger Rigging Kit, For Grand Slam 170, Up to 22 ft, 100 ft Dacron Cord

Overview

The TACO Marine RK-0001SB is a standard outrigger rigging kit for TACO Grand Slam 170 outrigger poles and outrigger setups up to 22'. It gives anglers the main rigging hardware needed to get a pair of poles ready for offshore trolling without piecing together small parts one at a time.

The kit centers around 100' of 1/8" black Dacron rigging cord, paired with release clips, line stops, swivels, crimps, and mounting hardware for a clean, functional outrigger setup. The included mesh bag also makes it easier to keep the rigging parts together on board between installation, service, and storage.

Key features

• Made for rigging TACO Grand Slam 170 outrigger poles and outrigger installations up to 22'.
• Includes 100' of 1/8" black Dacron rigging cord for setting up the outrigger lines.
• Glass ring with brass strap clips supports a secure connection point in the rigging layout.
• Adjustable tension release clips help tune how the fishing line is held and released while trolling.
• 1-1/4" outrigger line stops help control line position and keep the rigging organized.
• Pad eye with screws, double sleeve crimps, swivel, and snap swivel are included for a more complete installation.
• Quick-dry mesh bag keeps the rigging components together and easier to stow on the boat.
• Covered by a 1-year limited warranty.

What's included

• Glass ring with brass strap clips
• 100' of 1/8" black Dacron rigging cord
• Adjustable tension release clips
• 1-1/4" outrigger line stops
• Pad eye with screws
• Double sleeve crimp
• Swivel
• Snap swivel
• Quick-dry mesh bag

Installation and use

This kit is meant for anglers adding or refreshing outrigger rigging for offshore trolling, where controlled line placement helps spread baits away from the wake. It is a practical match for center consoles, sportfish boats, and other fishing boats already using compatible TACO outrigger poles.

During installation, check the pole length, outrigger mount layout, and preferred trolling spread before cutting or crimping the rigging cord. Dry-fitting the hardware first helps confirm line path, clip position, and working clearance around the T-top, hardtop, or tower.

Care on board

Rinse the rigging with fresh water after saltwater use, especially around clips, swivels, and crimped areas. Inspect the cord and connection points regularly, since outrigger rigging sees repeated movement, sun exposure, spray, and vibration during runs offshore.