TACO Marine Center Rigging Kit, For Up to 25' Outrigger, 50' UV-Protected Dacron Line

Overview

The TACO Marine RK-0001PCB is a premium center rigging kit for setting up one center outrigger pole up to 25 feet. It gives offshore and coastal anglers the core hardware needed to run a long bait from a center rigger without piecing together clips, swivels, line, and small installation parts separately.

The kit includes 50 feet of UV-protected Dacron line, release clips, a shock cord with a stainless steel snap, a 1-1/4 inch float and pulley, swivels, crimps, a stainless steel pad eye, screws, and a marine mesh storage bag. It is a practical fit for boats adding or refreshing a center outrigger setup for trolling spreads where clean line control and organized rigging matter.

Key features

• Rigs one center outrigger pole up to 25 feet for offshore trolling and bait presentation.
• Includes 50 feet of UV-protected Dacron line for the center rigger setup.
• Premium kit configuration includes a 1-1/4 inch float and pulley for the rigging line.
• Release clips, barrel swivel, snap swivels, and crimps support a complete outrigger rigging layout.
• Shock cord with stainless steel snap helps manage tension in the outrigger line.
• Stainless steel pad eye and screws are included for mounting the rigging attachment point.
• Marine mesh bag keeps the small parts together and lets wet gear drain after use.

Installation and setup

This kit is meant for a center rigger installation on fishing boats with an outrigger pole up to 25 feet. The included pad eye and screws provide the deck or hardtop attachment point, while the pulley, float, Dacron line, shock cord, swivels, crimps, and release clips make up the working rigging system.

During installation, confirm the routing path for the outrigger line, the attachment point location, and the release clip position before crimping the final setup. On boats that see salt spray, rinse the rigging hardware with fresh water after use and check clips, crimps, swivels, and line wear as part of regular tackle prep.

Use cases on board

The kit suits anglers rigging a center rigger for trolling long baits behind sportfishing boats, center consoles, and offshore-capable fishing boats. It is especially useful when a clean, organized rigging package is preferred over sourcing each small part separately.

What’s included

• Release clips
• Shock cord with stainless steel snap
• 1-1/4 inch float and pulley
• Barrel swivel
• Snap swivels
• Crimps
• Stainless steel pad eye
• Screws
• 50 feet of UV-protected Dacron line
• Marine mesh storage bag