TACO Marine Premium Single Outrigger Rigging Kit, Up to 22 ft, 100 ft 1/8 in Dacron Line

Overview

The TACO Marine RK-0001PB is a premium single outrigger rigging kit for setting up one pair of outriggers up to 22 ft. It brings the main rigging pieces together in one kit, including 100 ft of black Dacron rigging cord, release clips, pulley shock cord hardware, swivels, crimps, pad eyes, line stops, and a mesh storage bag.

This kit is a practical fit for offshore and coastal fishing boats where outriggers need clean line management, controlled release tension, and hardware that can handle repeated setup, washdowns, vibration, and saltwater exposure. The 1/8 in Dacron cord gives the spread enough line length for typical outrigger layouts while keeping the rigging compact and easy to service on board.

Key features

• Rigs one pair of outriggers up to 22 ft, with one rig on each pole.
• Includes 100 ft of black Dacron rigging cord with a 1/8 in thickness for common outrigger setups.
• Single roller pulley shock cord with stainless steel snap hardware helps keep the line moving smoothly under tension.
• Adjustable tension release clips let the crew tune line release for trolling conditions and lure presentation.
• 1-1/4 in outrigger line stops help keep the rigging positioned where it belongs during use.
• Pad eye hardware, crimps, snap swivel, and barrel swivels support a complete rigging layout without piecing together loose parts.
• Quick-dry mesh bag keeps small rigging parts together and lets wet components air out after a day offshore.
• Supplied as an each unit with a listed weight of 1.16 lb and a black line color.
• Covered by a 1-year limited warranty.

Installation and setup

This kit is meant for boats using outrigger poles for trolling spreads, whether on center consoles, sportfish boats, or similar fishing layouts. Before installation, check the outrigger length, mounting layout, and existing pad eye locations so the rigging path has a clean lead and the release clips sit where the crew can reach and adjust them safely.

The included crimps, swivels, line stops, and cord are used to build the rigging around the boat’s outrigger arrangement. Take time to tension both sides evenly, trim line ends cleanly, and rinse the rigging after saltwater use so moving parts continue to work freely.

Use on board

This single premium kit suits anglers who want a complete rigging refresh for a pair of outriggers rather than replacing individual parts one at a time. It is especially useful when preparing a boat for offshore trolling, seasonal recommissioning, or replacing worn cords, clips, and small hardware before a trip.

What’s included

• Adjustable tension release clips
• Single roller pulley shock cord with stainless steel snap hook and eye insert
• 1/8 in thick, 100 ft black Dacron rigging cord
• 1-1/4 in outrigger line stops
• Pad eye with screws
• Double sleeve crimp
• Snap swivel
• Barrel swivels
• Balsa wood floats and screws
• Quick-dry mesh storage bag