Overview

The Garmin Magnetic Protective Cover GPSMAP 9000 Series is a magnetic front cover that sits over the display of a compatible GPSMAP 9000 chartplotter when the unit is not being used. It helps keep salt spray residue, dust, and sun off the screen between runs.

The cover is sized to the chartplotter's display class, so it lays flat and stays put without straps or snaps. It is commonly used on open helms and center consoles where the screen is exposed at the dock, on a lift, or while trailering.

Key features

• Magnetic attachment for quick on and off with no tools or added hardware
• Available to match GPSMAP 9000 display sizes: 10 inch, 13 inch, 17 inch, 19 inch, 22 inch, 24 inch, and 27 inch
• Covers the screen and front bezel to help reduce scratches from incidental contact and keep fingerprints off the touchscreen
• Useful during storage, dockside cleaning, and transport when you want the display face covered
• Does not change wiring, networking, or power setup on the chartplotter

Variants

This cover is offered in multiple sizes. The difference across the range is the physical size of the cover so it matches the specific GPSMAP 9000 display footprint.

Match the cover to your chartplotter size class: 9x10, 9x13, 9x17, 9x19, 9x22, 9x24, or 9x27. Model examples include GPSMAP 9010 and 9210 (10 inch), GPSMAP 9013 and 9213 plus their xsv versions (13 inch), GPSMAP 9017 and 9217 plus their xsv versions (17 inch), GPSMAP 9019 and 9219 (19 inch), GPSMAP 9022 (22 inch), GPSMAP 9024 and 9224 (24 inch), and GPSMAP 9027 and 9227 (27 inch).

Installation and setup

With the chartplotter installed, place the cover over the front of the display and let the magnets pull it into position. For removal, lift from an edge and peel it away rather than sliding it across the screen.

If your helm sees a lot of spray or sand, wipe the bezel before installing the cover so grit does not get trapped between the cover and the screen.

Compatibility and fit

This is a fixed-mount GPS cover made for GPSMAP 9000 chartplotter displays. It is not a universal cover, so the size needs to match the chartplotter model and display class shown on the unit or in your installed electronics list.

Maintenance and care

Rinse with fresh water and dry it after heavy spray or cleaning. Avoid harsh solvents that can soften plastics, and store the cover flat so it keeps its shape.