Overview

The Perko 1269DP099A is a spare waste cap with O-ring for Perko Fig. 1269 waste deck plates. It is the replacement cap only, not the complete deck fill, and it fits the 1269 waste plate used on 1-1/2 inch hose installations.

The cap is molded in black polymer and uses the same two-hole pattern with a slot between the holes as the original. For boats with a dedicated pump-out fitting on deck, this is the straightforward fix when the original cap is missing, cracked, or no longer sealing cleanly.

Key features

• Direct replacement cap for Perko Fig. 1269 waste deck plates
• O-ring included for the cap seal
• Fits Perko 1269 waste fills used with 1-1/2 inch hose
• Black polymer cap
• Cap uses the original two-hole pattern with a slot between the holes
• Useful as an onboard spare for boats with a dedicated waste pump-out fitting

Compatibility and fit

This cap is for the waste version of Perko's 1269 deck plate. It is not a universal cap and it is not the cap for the gas, diesel, or water versions in the same family, so matching the figure number on the deck plate matters before ordering.

On board, this part usually sits at the pump-out deck fitting where washdowns, sun, and foot traffic are part of normal use. Replacing a worn cap and O-ring helps the fitting close properly between pump-outs and helps reduce the chance of seepage at deck level.

Installation and use

Installation is simple: remove the old cap, clean the threads and sealing surface on the deck plate, and thread the replacement on until the O-ring seats evenly. This is a good match for owners who already have a Perko 1269 waste fill and want a correct spare on hand without changing the full deck plate assembly.