i2Systems Profile P1101 Surface-Mount LED Light, 9-30V, 2.5W, IP67, 120° Beam, 3.48 in Dia, 0.72 in Deep
-
Perfect Fit, Guaranteed
Get the right part every time
-
Expert Support
Our in-house specialists know our products inside and out
-
Enhanced Value & Service
We go beyond the sale with professional and balanced services
-
Wordwide Delivery
Enjoy hassle-free worldwide delivery
i2Systems Profile P1101 Surface-Mount LED Light, 9-30V, 2.5W, IP67, 120° Beam, 3.48 in Dia, 0.72 in Deep
Write a Review
i2Systems
i2Systems Profile P1101 Surface-Mount LED Light, 9-30V, 2.5W, IP67, 120° Beam, 3.48 in Dia, 0.72 in Deep
Overview
The i2Systems Profile P1101 is a low-profile, surface-mount LED downlight for boats where you want clean overhead lighting without cutting a large hole. It draws 2.5 W and mounts as a 3.48 in round fixture with a 0.72 in depth, so it works well on cabin liners, hardtops, arches, and other areas where clearance behind the panel is limited.
The housing is stainless steel with a titanium-coated trim bezel and an IP67 rating for wet marine spaces. Light output is spread with a 120 degree beam, and the wiring is a simple 2-wire hookup that works with a standard on-off switch circuit.
Key features
- Surface-mount form factor with a low 0.72 in depth for refits and tight overhead spaces
- 3.48 in round footprint to cover existing marks and clean up older installations
- 2.5 W LED draw for efficient cabin and cockpit lighting
- IP67 rating for areas that see spray, washdowns, and vibration on board
- 120 degree beam for general illumination without a harsh hotspot
- Simple 2-wire hookup that fits typical boat lighting circuits and switching
- Stainless steel body with a titanium-coated trim bezel for long-term finish consistency
Variants
This light is offered in multiple configurations so you can match the look of your interior and the light appearance you prefer.
Options vary by light color (Warm White or Cool White) and trim finish (Chrome Finish, White Finish, Off White, or Brushed Nickel Finish).
Installation and setup
The Profile P1101 mounts directly to the surface, making it a practical choice when you want to avoid deep recesses or large cutouts. Plan wire routing before fastening the light down, and leave enough slack so the conductors are not under tension as the boat flexes underway.
Use marine-grade connectors and make sure any penetrations are properly sealed for the mounting location. If you are replacing an older surface light, confirm the existing wiring condition and switching arrangement before final assembly.
Compatibility and fit
Confirm the available mounting area for a 3.48 in round light and verify you have at least 0.72 in of clearance behind the mounting surface, plus room for the wire bend and connection. A flat, stable mounting surface helps the trim sit evenly and keeps the installation looking clean.
Use cases on board
This style of downlight is a good match for owners updating cabin headliners, adding overhead light under a hardtop, or tidying up courtesy lighting in cockpits and companionways where a shallow surface mount makes the job simpler. The wide beam works well for general illumination in cabins, heads, helm areas, and covered outdoor spaces.
Maintenance and care
For routine cleaning, use mild soap and water and avoid abrasive pads that can haze the trim. In saltwater environments, a quick fresh-water rinse after washdowns helps keep the finish looking consistent over time.
We ship all in-store (FL) stock orders the same day if placed before 3 PM EST, Monday through Friday. Orders placed after this time will ship the next business day. Orders fulfilled from other warehouses or manufacturers may not ship the same day. If an item is out of stock, we will notify you promptly.
Related Products
i2Systems Profile P1100 Surface Mount LED Light, 9-30VDC, IP67, Stainless Steel, 1.5W, 120 Degree Beam, 3.48in Round, 0.72in Deep
i2Systems Profile P1120 Tri-Light Surface-Mount LED Downlight, 9-30V DC, IP67, 3.48in Round, 0.72in Deep, 2-Wire Color Switching
i2Systems Apeiron A3101Z Screw-Mount LED Downlight, 9-30V DC, IP67, 2.5W, 3.5in Dia, Brushed Nickel Trim
i2Systems Apeiron A3101Z Screw Mount LED Downlight, 9-30V DC, IP67, 2.5W, Stainless Steel, 2.59 in Cutout
i2Systems Apeiron A1110Z LED Downlight, 9-30V DC, IP67, Spring Mount