Overview

The Garmin 010-12504-00 is a snap-on trim ring cover for Garmin VHF 110 and VHF 115 fixed-mount marine radios. It replaces the front trim snap cover when the original is lost, cracked, or missing.

This is a cosmetic, no-wiring part that clips onto the radio face to clean up the installation and bring the bezel back to a finished look on the helm.

Key features

• Replacement trim ring snap cover for Garmin VHF 110 and VHF 115 marine radios
• Snap-on fit for quick, tool-free installation on the radio bezel
• No electrical or network connections; it does not affect radio operation or system wiring
• Useful as a spare for boats where the helm sees frequent handling, cleaning, or bumps

Compatibility and fit

Compatible with Garmin VHF 110 and VHF 115 fixed-mount marine radios. Confirm the radio model on the unit label or faceplate before ordering, since this cover is not a universal trim ring.

Fit is at the front of the radio, so it is independent of antenna, power, and NMEA connections. The key requirement is that the bezel area is unobstructed so the cover can fully snap into place.

Installation and setup

Align the cover to the bezel and press evenly until it seats all the way around. If the radio is installed close to a dash lip or tight trim, make sure nothing is pinching the cover before snapping it on.

For removal, work gently from an edge to avoid marking the dash surface around the radio.

Use on board

This cover makes sense for skippers who want the helm to stay tidy, boats that are washed down often, and anyone keeping a small spares kit for electronics at the nav station.

Maintenance and care

Rinse with fresh water after salt exposure and wipe with a soft cloth. Use mild soap if needed and avoid harsh solvents that can haze or soften plastics.