TACO Marine 3-Rod Bungee Rod Holder, White UV-Stabilized HDPE, 12-1/2 in x 3-3/4 in

Overview

The TACO Marine P03-133W is a white 3-rod poly bungee rod holder rack for keeping fishing rods stored under the gunnel or on a vertical mounting surface. It holds up to three rods in a compact 12-1/2 in. length and 3-3/4 in. depth, with a 1/2 in. thick body that fits cleanly into tight storage areas where loose rods would otherwise slide around or take up deck space.

The rack is made from UV-stabilized high-density polyethylene, so it is suited to exposed boat storage areas where sun, spray, and routine washdowns are part of normal use. Adjustable bungee cords help keep rods seated while the boat is moving, trailering, or running through chop.

This is a practical fit for anglers who want quick access to rods without adding flush-mount holders or drilling large holes through the deck or gunwale. It works well for center consoles, bay boats, pontoons, and small fishing boats where under-gunnel storage helps keep the cockpit clear.

Key features

• Stores up to three fishing rods under the gunnel, along a bulkhead, or on another suitable flat mounting surface.
• Adjustable bungee retention helps keep rods in place while the boat is underway or being transported.
• UV-stabilized high-density polyethylene body stands up to sun exposure in marine storage areas.
• White finish blends well with common boat interiors, liners, and under-gunnel areas.
• Compact 12-1/2 in. length and 3-3/4 in. depth help preserve cockpit and storage space.
• Mounting backing plate and hardware are included for a straightforward installation.

Installation and fit

Mount the rack where the rods can sit securely without interfering with hatches, seating, wiring, steering lines, or other gear. Under-gunnel mounting is the most common boat use, but the rack can also be used on a garage wall or dockside storage area when the surface is suitable for the supplied hardware.

Before drilling, position the rack with the rods in place to confirm handle clearance, reel clearance, and access to the bungee cords. A backing plate is included, which is useful when mounting through thinner panels or areas that benefit from a wider load spread.

Use cases on board

This rod rack is well suited to boats that need simple rod organization without adding a permanent vertical rod launcher or leaning rods against the console. It helps keep rods off the deck during coastal fishing, dockside prep, trailering, and short runs between fishing spots.

The bungee layout makes it useful for everyday storage rather than active trolling or rod deployment. Rods stay close at hand, but the rack is meant for stowing gear safely and neatly when the rods are not in use.

What’s included

• 3-rod poly bungee rod holder rack
• Mounting backing plate
• Mounting hardware