TACO Marine 2-Rod Bungee Rod Holder, White, 9-1/4 in, HDPE

Overview

The TACO Marine P03-132W is a white 2-rod bungee rod holder rack for under-gunnel rod storage, made to keep rods tucked away but still quick to reach on fishing boats and pontoons. It measures 9-1/4 inches long, 3-3/4 inches deep, and 1/2 inch thick, giving it a low-profile fit along the inside of the gunwale or another flat storage area where rods need to stay clear of the deck.

The rack is made from U.V. stabilized high-density polyethylene, a practical material choice for cockpit and gunnel areas exposed to sunlight, spray, and regular washdowns. The integrated bungee cords hold rods in place while the boat is running, trailering, or moving through chop, helping reduce clutter and keeping tackle easier to manage during a fishing day.

Key features

• Holds two fishing rods for simple under-gunnel storage without taking up deck space.
• Bungee retention keeps rods seated in the rack while the boat is underway.
• U.V. stabilized high-density polyethylene helps the white rack stand up to sun exposure in marine use.
• 9-1/4 inch length, 3-3/4 inch depth, and 1/2 inch thickness suit compact mounting areas along the gunwale.
• White finish blends cleanly with many fiberglass interiors and cockpit layouts.
• Supplied with a mounting backing plate and hardware for installation.

Installation and fit

This rack is intended for mounting under the gunwale or in another protected, reachable storage location where rods can slide in and out without interfering with seating, hatches, wiring, or rod tips. Before drilling, check the back side of the mounting area for access, clearance, and enough surface strength to support the rack and the rods it will carry.

The included backing plate and hardware help spread the load at the mounting point. On cored fiberglass, aluminum, or pontoon panels, a dry-fit is useful before final fastening so the rack sits straight and the rods have a natural path in and out of the holders.

Use on board

This 2-rod rack is a good match for anglers who want a tidy place for spare rods, trolling setups, or quick-change tackle without adding tall vertical holders to the deck. It works especially well in cockpit and under-gunnel spaces where rods need to stay protected from foot traffic but remain close at hand.

Maintenance and care

Rinse the rack and bungee area with fresh water after saltwater trips, especially when it has been exposed to spray, bait, or sunscreen residue. During regular boat checks, look over the mounting hardware and bungee tension so the rack continues to hold rods securely through vibration, trailering, and repeated use.

What’s included

• 2-rod bungee rod holder rack
• Mounting backing plate
• Mounting hardware