Overview

The Garmin 010-12439-00 is a tilt/swivel mount for STRIKER 4 and STRIKER 4dv fishfinders. It secures the display at the helm and gives you an adjustable viewing angle without changing anything about your transducer installation.

Tilt lets you manage glare and viewing height, and swivel makes it easier to aim the screen from the helm or a nearby seat. Shipping size is roughly 6 in x 4 in x 3 in and shipping weight is about 0.2 lb.

Key features

• Compatible with Garmin STRIKER 4 and STRIKER 4dv displays
• Tilt and swivel adjustment for quick viewing changes at the helm
• Mount style suited to consoles, small dashes, and compact electronics panels
• Black finish that blends with common marine helm surfaces

Compatibility and fit

Match the mount to the exact unit model shown on the bezel or in the device settings. This bracket is for the STRIKER 4/4dv form factor; if your unit is a different STRIKER size or series, the cradle and pivot points may not match.

This is a display mount, not a transducer bracket. It does not change how your transducer is installed or what transducer you run.

Installation and setup

Choose a mounting spot that leaves clearance behind the display so it can tilt through its range without contacting a windshield frame, grab rail, or throttle binnacle. Before tightening everything down, confirm you can read the screen while seated and standing.

Leave enough slack in the power and transducer cables so the head unit can swivel without tugging on connectors. If the helm gets frequent washdowns, rinse salt residue from the mount and check fasteners for tightness as part of routine maintenance.

Use cases on board

This mount is a practical replacement when the original bracket is cracked or missing, and it also helps when you want the STRIKER 4/4dv moved to a better sightline on a skiff, pontoon, small center console, or kayak console.