Raymarine Retrofit Bezel, For i50, i60, i70, p70 & p70R, Black

Overview

The Raymarine A80355 is a black retrofit bezel for Raymarine i50, i60, i70, p70 and p70R displays and pilot control heads. It is used as a spare or replacement trim piece when refreshing an installed helm, matching older instruments into a cleaner black panel layout, or replacing a worn bezel around an otherwise working display.

This part is a cosmetic and mounting-related accessory, not an electronic module. It has no voltage, network, or software requirements, so fit is driven by the compatible Raymarine display model and the physical installation space. The packaged item is listed with box dimensions of 2 in H x 5 in W x 5 in L and a weight of 0.2 lb.

Key features

• Fits Raymarine i50, i60, i70, p70 and p70R units for retrofit or replacement work.
• Black bezel finish helps match a helm panel, cockpit pod, or instrument cluster with black Raymarine displays.
• Works as a spare trim piece when the original bezel is scratched, missing, or no longer suits the panel layout.
• No electrical connection, power draw, NMEA wiring, or software setup is involved.
• Compact package size of 2 in H x 5 in W x 5 in L with a listed weight of 0.2 lb.

Installation and fit

Before ordering, confirm the display or control head model printed on the front of the unit or shown in the vessel documentation. This bezel is for the listed Raymarine i50, i60, i70, p70 and p70R families, so it should not be treated as a universal trim part for every Raymarine instrument or multifunction display.

During installation, check the surrounding panel, pod, or binnacle cutout for old sealant, cracked trim, or uneven fasteners before seating the new bezel. A clean mounting surface helps the replacement sit properly and keeps the finished helm looking tidy.

Use cases on board

This bezel makes sense for boat owners refitting an instrument panel, replacing weathered trim at the helm, or keeping an existing Raymarine instrument setup presentable without changing the working electronics. It is also useful during cockpit upgrades where the displays remain in service but the visible trim needs to match the rest of the dash.

Compatibility notes

This is an exterior trim and mounting accessory for compatible Raymarine instruments and pilot control heads. It does not add display functions, change autopilot behavior, or affect SeaTalk, NMEA 0183, NMEA 2000, or power wiring. System compatibility depends on the installed Raymarine unit, while this part is only concerned with the physical bezel fit.