Overview

The Garmin 010-C1203-00 is a Standard Mapping Florida West Peninsula Professional microSD/SD chart card that adds a sectioned coastal aerial overlay with high-resolution imagery, plus local waterway and land feature names, on a compatible Garmin chartplotter.

It also calls out practical details that matter on Florida's Gulf side, including oyster lease areas, artificial reef locations, and clear state and federal offshore boundaries. Wildlife Management Areas and Offshore Lease Areas are outlined on the chart so you can keep track of where you are while you run and fish.

Key features

• microSD/SD chart card format for compatible Garmin chartplotters with a card slot
• Sectioned coastal aerial overlay with high-resolution imagery for Florida West Peninsula coverage
• Local names of waterways and land features for quicker on-screen orientation
• Wildlife Management Areas and Offshore Lease Areas outlined on the chart
• Oyster lease areas outlined in white
• Artificial reefs identified with a white dot
• State and federal offshore boundaries shown to help confirm jurisdiction lines underway

Compatibility and fit

This card is intended for Garmin chartplotters that support additional cartography through a microSD or SD card slot. Confirm your unit has the correct card slot and that it supports reading map cards before purchase. It is not compatible with STRIKER fishfinders.

Installation and use

Insert the card into the chartplotter's card slot, then select the chart and turn the aerial overlay layer on in your chart settings as needed. Many skippers keep the overlay off while running offshore and switch it on when working tight to the coast, inside passes, or around shallow flats where visual shoreline detail helps with quick decisions.

Use cases on board

This mapping is a good match for Gulf Coast cruising, inshore anglers, and charter crews who spend time around lease areas, managed zones, and reefs and want those features visible on the plotter without juggling separate references.

Care and handling

Keep the card dry and free of salt spray, and store it in a case when it is not in the plotter. If you move it between displays, power the unit down before removing or inserting the card to avoid file errors.