TACO Marine ShadeFin Adjustable Clamp-On Pipe Mount, 316L Stainless Steel, 3/4 in or 1 in Pipe, 1-1/4 in Tube

Overview

The TACO Marine T10-3000-7 is an adjustable clamp-on pipe mount for securing a ShadeFin shade system on boats that do not have an open rod holder available. It fits 3/4 inch or 1 inch schedule-40 pipe, as well as 1-1/4 inch O.D. tube, making it useful on many hardtops, T-tops, rails, tower legs, and other round-tube mounting points.

The mount gives the ShadeFin a stable attachment point while still letting the user change the shade angle on the water. Adjustment is handled with a soft-touch knob, and the mount indexes every 15 degrees with safety detents so the ShadeFin can be aimed where coverage is needed as the sun moves.

Key features

• Fits 3/4 inch or 1 inch schedule-40 pipe and 1-1/4 inch O.D. tube for use on common boat rail and top structures.
• Made from Type-316L stainless steel with a high-polish finish for exposed marine mounting locations.
• Angle adjustment every 15 degrees helps position the ShadeFin for changing sun direction during the day.
• Soft-touch knob allows on-board adjustment without needing tools for routine repositioning.
• Safety detents help hold the selected angle once the ShadeFin is set.
• Self-aligning notch and pin-locking hole help the ShadeFin seat correctly in the mount.
• Useful for boats with limited rod holders or for installations where the available rod holders are already being used for fishing gear.
• Backed by a 1-year limited warranty.

Installation and fit

This mount clamps directly to compatible round pipe or tube, so it is a practical option when adding ShadeFin coverage to a cockpit, helm area, bow seating zone, or aft deck without drilling into a rod holder location. Before purchase, the pipe or tube diameter should be checked carefully against the supported sizes: 3/4 inch schedule-40 pipe, 1 inch schedule-40 pipe, or 1-1/4 inch outside-diameter tube.

Because the mount carries a shade accessory, the selected location should be a solid structural point with enough clearance for the ShadeFin to rotate and sit at the intended angle. On boats with T-tops or hardtop supports, the mount can help place shade where it is useful while keeping rod holders free for rods, flags, or other accessories.

Materials and marine use

Type-316L stainless steel is a strong match for exposed deck hardware, especially where salt spray, washdowns, and sun exposure are part of normal use. The high-polish finish also matches well with many stainless rail and top assemblies, which helps the mount look integrated rather than like an add-on.

This mount is a good fit for boat owners adding TACO Marine ShadeFin coverage to center consoles, fishing boats, cruisers, and day boats where fixed shade is limited or where flexible shade positioning matters during long hours on board.