Overview

The Blue Sea Systems 1325 is a 360 Panel mounting kit used to install a VSM 422 monitor into an existing 360 Panel. It includes the mounting bezel and eight flat head screws: four #6-32 x 1.125 in. screws and four #6-32 x 1 in. flat head machine screws.

This is a practical fit for boats already built around the Blue Sea Systems 360 Panel format at the helm or main electrical panel. It is mounting hardware only, so the main check before ordering is that your setup uses a VSM 422 and an existing 360 Panel location where the monitor needs to be secured in the panel.

Key features

• Made for mounting a VSM 422 into an existing Blue Sea Systems 360 Panel
• Includes the mounting bezel needed for the panel installation
• Hardware pack includes four #6-32 x 1.125 in. flat head screws and four #6-32 x 1 in. flat head machine screws
• Useful when replacing hardware or adding a VSM 422 within a modular 360 Panel layout

Compatibility and fit

This kit is specific to the VSM 422 and the 360 Panel system. It suits refit work where the boat already has a 360 Panel and the monitor needs to sit within that panel layout instead of being treated as a separate loose component.

It makes the most sense for owners updating a helm or electrical panel where system information is viewed regularly and the panel layout needs to stay consistent. For catalog matching, the two key fit points are VSM 422 compatibility and an existing 360 Panel installation.

What's included

• Mounting bezel
• Four #6-32 x 1.125 in. flat head screws
• Four #6-32 x 1 in. flat head machine screws