Overview

The Lumishore 010-14465-00 is a 6-core 2-way cable splitter for Lux Strip and Neon Flex lighting runs. It lets you branch a single 6-conductor feed into two legs so you can run separate light sections in different directions without cutting and splicing the main harness.

This is most useful at junction points where multiple runs meet, like behind a cockpit panel, inside a locker, or under a coaming. Mount it where you can still reach it later and support the wiring so vibration does not work the cables loose over time.

Key features

• 6-core wiring path for Lux Strip and Neon Flex systems that use a 6-conductor connection
• 2-way splitter layout to branch one feed into two separate lighting legs
• Helps keep installs tidy by reducing mid-run splices and butt connectors
• Handy for splitting port and starboard runs or feeding adjacent zones from one routing path

Compatibility and fit

Compatible with Lux Strip and Neon Flex products that use a 6-core connection. Before ordering, confirm your lights and supply harness are the 6-core version and that the splitter is being placed on the correct side of your layout for your control and power wiring.

Installation and setup

Plan the split point so cable routing stays clean and protected. Use gentle bends, add strain relief, and secure the harness so the splitter is not carrying cable weight. On boats, keep junctions out of standing water, build in drip loops where practical, and protect wiring from chafe anywhere it passes through bulkheads or under seating.

Who it suits

A good match for boaters laying out multi-run strip or neon flex lighting where one feed needs to serve two directions, such as splitting a main run into port and starboard legs or distributing light into adjacent lockers and seating bases.