Blue Sea Systems Single Meter Mounting Panel, For 2-3/4 in Analog or Digital Meters, Mounting Screws, Center Adjustment Hole Plug

Overview

The Blue Sea Systems 1475 is a mounting panel for a single standard 2-3/4 inch analog or digital meter. It gives you a clean way to add one meter to a helm, electrical panel, or monitoring station without cutting a custom faceplate, and the panel itself measures 4.75 inches high by 4.88 inches wide.

This panel is a straightforward fit for boats that use one dedicated voltmeter, ammeter, or similar round gauge-style electrical monitor. It works well when you want the meter face mounted neatly on an existing flat surface and want the finished installation to look organized rather than improvised.

Because it accepts the common 2-3/4 inch meter size used across many Blue Sea Systems analog and digital meters, it is a practical match when replacing an old panel insert or adding a new electrical readout to a DC or AC monitoring setup.

Key features

• Fits one standard 2-3/4 inch analog or digital meter
• Panel size is 4.75 inches by 4.88 inches for a compact single-meter layout
• Includes mounting screws for installation
• Includes a center adjustment hole plug for a cleaner finished face when needed
• Works with a wide range of Blue Sea Systems analog meters and Blue Sea digital meters that use the 2-3/4 inch format

Compatibility and fit

This panel is intended for single-meter installations where the meter itself uses the standard 2-3/4 inch face size. That makes it relevant for many common marine electrical monitoring jobs, such as adding a DC voltmeter near the switch panel, placing an ammeter in a machinery space control area, or creating a small dedicated meter position at the nav station.

Before ordering, the key check is meter face size rather than system voltage. The panel is a mounting piece, so fit is determined by the meter diameter and the available flat mounting surface on the boat.

Installation and setup

On board, this panel suits refit work and new installations where you want one meter mounted cleanly without fabricating a custom surround. The included screws help speed up the install, and the center adjustment hole plug is useful when you want the panel face to stay tidy after the meter is in place.

This is a good match for boat owners, installers, and yard teams building out a simple monitoring point for battery voltage, charge and discharge current, or AC system readings where a single dedicated meter is easier to read at a glance.

What’s included

• Single meter mounting panel
• Mounting screws
• Center adjustment hole plug