Overview

The Garmin City Navigator Australia & New Zealand NT is a street navigation map product that adds routable road maps and points of interest for Australia and New Zealand to compatible Garmin GPS devices. It includes nearly 1.3 million km (796,000 mi) of roads and more than 630,000 points of interest, with address and intersection search for turn-by-turn routing on supported units.

This is road and inland mapping, not a nautical chart. On a boat, it is most useful for the parts of the trip that happen off the water, like trailering to ramps, getting to marinas by car, provisioning runs, or navigating inland after you tie up.

It is sold as a full map product (not a map update) and device compatibility varies by model, region support, and delivery format. Use the format that matches how your Garmin unit loads maps.

Key features

• Street-level maps for Australia and New Zealand with routable navigation on compatible Garmin devices
• Nearly 1.3 million km (796,000 mi) of roads, covering motorways through local roads
• More than 630,000 searchable points of interest, including fuel, lodging, restaurants, and attractions
• Address and intersection search to help confirm you can route to a specific destination
• Available as a preprogrammed microSD/SD card or as a computer download installed through Garmin Express
• Full map product, not a map update
• Not compatible with all devices, so confirming map support for your exact Garmin model matters

Variants

This product is offered in multiple configurations based on how the map data is delivered.

The mapping coverage is the same across the range, while the purchase format changes how you load and keep the maps available on your Garmin device.

• 010-11875-00: Format SD Card. Supplied on a preprogrammed microSD/SD card that the device reads directly, which keeps the maps available as long as the card remains inserted.
• 010-D1257-00: Format Download. Delivered digitally for installation using Garmin Express on a computer, which is helpful when you prefer not to wait for a physical card.

Compatibility and fit

City Navigator maps require a Garmin unit that supports City Navigator mapping for the Australia and New Zealand region. For the card version, your device needs a compatible microSD/SD card slot. For the download version, your device needs to connect to a computer that can run Garmin Express for installation.

If you are buying this for a boat system, keep in mind it does not replace marine charts for on-water navigation. Many skippers carry it as a separate road navigator for the tow vehicle, rental cars, or shore logistics.

Installation and setup

For the card format, insert the microSD/SD card into the device and allow the unit to load the map data. Keep the card installed whenever you want access to the maps.

For the download format, connect your Garmin device to a computer and follow the prompts in Garmin Express to install the map. During installation, a steady power source helps avoid interruptions, especially if you are doing this onboard through shore power or a stable 12V supply.

Use cases on board

This map product is a good match for boaters in Australia and New Zealand who trailer frequently, run between marinas by road, or want a dedicated Garmin navigator for shore runs while the boat electronics stay focused on marine charts.