Overview

The Garmin 010-12165-03 is a trim piece snap cover for GPSMAP 12x2 Touch and GPSMAP 7x12 series chartplotters. It replaces missing or broken trim so the front of the installation looks tidy again after a refit or service.

This is a cosmetic trim component, not a sun cover and not a sealing part for the display. If your unit is already installed and operating normally, this piece is about restoring the finished edge around the chartplotter.

Key features

• Snap cover trim piece for compatible Garmin GPSMAP 12x2 Touch and GPSMAP 7x12 series displays
• Restores the finished look when trim is misplaced, cracked, or removed during electronics work
• Front-fit snap-in installation with no wiring or network integration
• Handy spare to keep aboard for helm refreshes, seasonal removals, or service visits

Compatibility and fit

Fit is specific to the GPSMAP 12x2 Touch and GPSMAP 7x12 series families. Before ordering, confirm your chartplotter series and bezel style match what you are replacing, since trim pieces are not interchangeable across different GPSMAP sizes and generations.

Installation and handling

With the display mounted, align the cover to the bezel and press evenly until it seats. If you need to remove it later, work slowly and use a plastic trim tool so you do not mark the helm panel or the display face.

Use on board

This part is a good fit for boats with an open helm where gear gets bumped during docking, cleaning, or fishing days, and for owners bringing an older install back to a clean, finished look. It is also useful when a unit has been removed for service and the original trim did not make it back aboard.

Maintenance and care

Rinse with fresh water after salt spray and wipe with mild soap when needed. Avoid harsh solvents that can haze plastics, and let the part dry before snapping it back in place.