-
Attwood Marine Stainless Steel Snap Hook, 5/16 in x 3-1/8 in, 575 lb Safe Load
OverviewThe Attwood Marine 12415L3 is a stainless steel marine carabiner with a spring-loaded closure for clip-on connections around the boat that need to open and close without tools. It measures...$23.85 -
Attwood Marine Groove Rib Roller, 5 in, Yellow Rubber
OverviewThe Attwood Marine 11882-1 is a 5" groove rib roller for automatic adjusting roller systems on boat trailers. This yellow replacement roller measures 5" in diameter and 3" wide, and it uses a...$16.68 -
Attwood Marine Clam Shell Vent, Stainless Steel, Large
OverviewThe Attwood Marine 66400-1 is a clam shell vent in stainless steel for larger exterior vent holes and for wire or hose pass-throughs that need splash cover on a boat. It uses 300 series...$5.06 -
Attwood Marine Stainless Standard Gas Spring, 10 lb, 15 in Extended, 9.5 in Compressed, 10mm Socket
OverviewThe Attwood Marine ST13-10-5 is a stainless gas spring hatch support with a 15.00 inch extended length, a 9.50 inch compressed length, and a 10 lb output force. It uses a 6mm rod x 15mm...$41.57 -
Attwood Marine Ni-Slide Gas Spring Hatch Support, 60 lb, 20 in Extended, 12 in Compressed, 10 mm Blade Ends, Black Finish
OverviewThe Attwood Marine SL3-60-5 is a 60 lb gas spring hatch support with a 20 inch extended length, 12 inch compressed length, and an 8 inch stroke. It is part of the Ni-Slide aftermarket range...$23.31 -
Sold out
Attwood Marine Snap-Lock Seat Mount, For 1.77 in Posts, 3 Degree Tilt, E-Coated Steel
OverviewThe Attwood Marine SP-19000 is a Snap-Lock seat mount for 1.77 in. pedestal systems that use a 1-3/4 in. D post. It has a 3 degree tilt and an E-coated steel body, which makes it a...$61.14Out of stock
-
Attwood Marine Neat Cleat Retractable Cleat, 6 in, 316 Stainless Steel
OverviewThe Attwood Marine 66517-1 is a 6 inch retractable Neat Cleat in stainless steel for boats that need a low-profile tie-off point without leaving a fixed cleat in the way. It sits down to...$82.59 -
Sold out
Attwood Marine All-Round Light Replacement Globe, Frosted, Polycarbonate
OverviewThe Attwood Marine 91017B7 is a frosted replacement globe lens for compatible Attwood all-round lights. It fits 5100, 5110, 7100, 7101, 7105, 7109, 7205, 910958, and 910957 series lights, so...$9.18Out of stock
-
Attwood Marine Thread-to-Barb Connector, For 500-800 GPH Pumps, 3/4 in ID Hose, 3/4-14 NPSM
OverviewThe Attwood Marine 3899-1 is a straight hose connector for 3/4 inch ID hose, used where you need to join hose to a threaded drain or pump port without adding a 90 degree turn. It has a...$11.46 -
Attwood Marine 238 Series Socket Base, 9 in, Cut Both Sides, Aluminum, 3 in Mounting Hole
OverviewThe Attwood Marine 238352-1 is a 9 inch aluminum socket base with a cut-both-sides profile for the 2-3/8 inch 238 seating platform. It has an anodized finish and requires a 3 inch mounting...$60.33 -
Attwood Marine In-Line Fuel Overflow Protector, 5/8 in Hose, ABYC H-24, Ball-Style Check Valve
OverviewThe Attwood Marine 1675-6 is an in-line fuel overflow protector for traditional fuel tank vent systems that use standard 5/8" ID vent hose. It installs in the vent line rather than the fill...$29.99 -
Attwood Marine Hidden Horn Kit, 12V, 105 dB, Remote Mount
OverviewThe Attwood Marine 11477-3 is a 12-volt hidden horn for remote mounting below deck, behind the dash, or behind the console. It produces a 105 dB signal and uses a compact horn body that...$34.52