-
Attwood Marine Swivl-Eze Deck Mounted Seat Slide, For Stamped/Welded or Cast Seat Mounts, 1-5/8 in Height, Aluminum, Front Control
OverviewThe Attwood Marine 815000 is a deck-mounted seat slide for adding fore-and-aft seat adjustment to boats that use stamped or welded seat mounts, or cast seat mounts that were not originally...$210.51 -
Attwood Marine SWIVL-EZE Lock'N-Pin Pedestal Kit, 3/4 in System, 13 in Post, 7 x 7 in Stainless Steel Threaded Base Plate
OverviewThe Attwood Marine 977339-T is a SWIVL-EZE Lock'N-Pin 3/4 inch pedestal kit with a 13 inch post, a 7 inch x 7 inch threaded stainless steel base plate, and a black E-coated seat mount. It is...$116.40 -
Attwood Marine Garboard Drain Plug, 1/2 in NPT, Cast Bronze
OverviewThe Attwood Marine 7555-3 is a cast bronze garboard drain plug for draining bilge water when the boat is hauled and sealing the drain opening again before launch. It uses a 1/2-inch NPT...$16.99 -
Attwood Marine SWIVL-EZE LakeSport Fixed Height Extension Post, For 238 LakeSport Seat Mounts and Socket Bases, 13 in Height, 2-3/8 in Diameter, Hard-Anodized Aluminum
OverviewThe Attwood Marine 238613L1 is a fixed-height SWIVL-EZE LakeSport extension post for Attwood 238 Series seat mounts and socket bases. It uses a 2-3/8" post and sets seat height at 13",...$58.01 -
Attwood Marine SWIVL-EZE LakeSport Seat Mount, For 2-3/8 in D Posts, Friction Control, Aluminum, 3 Degree Tilt
OverviewThe Attwood Marine 818440 is an aluminum seat mount for LakeSport 238 pedestal systems that use a 2-3/8 inch post. It adds friction control to keep seat movement from feeling too loose,...$49.72 -
Attwood Marine Yamaha Fuel Line Kit, 6 ft x 3/8 in, Universal Sprayless Connector, Low-Permeation Primer Bulb, Ethanol Compatible
OverviewThe Attwood Marine 93806YUS7 is a 6-foot fuel line kit for Yamaha engines and tanks with a 3/8-inch inside diameter hose, a low-permeation primer bulb, and a Universal Sprayless Connector. It...$74.99 -
Attwood Marine Replacement Shower Head Sprayer, For Aft-Deck Shower
OverviewThe Attwood Marine 911421A5 is a replacement shower head sprayer for compatible Attwood aft-deck shower systems. It is the handheld head only, so it fits repairs where the recessed shower...$34.99 -
Attwood Marine Rope Ladder, 5-Step, 11-3/4 in Blow-Molded Steps, Cleat or Railing Mount, Fold-Flat
OverviewThe Attwood Marine 11865-4 is a 5-step rope boarding ladder with white 11-3/4 inch blow-molded steps and a textured surface for footing when climbing back aboard. It attaches with a nylon...$51.99 -
Attwood Marine Grapnel Anchor System, 3.5 lb, 25 ft Rope, Storage Case
OverviewThe Attwood Marine 11969-4 is a 3.5 lb grapnel anchor system for small watercraft such as personal watercraft, canoes, dinghies, kayaks, and float tubes. It includes a folding grapnel anchor,...$63.94 -
Attwood Marine Fender Cleat, 3-1/2 in, 316 Stainless Steel, Retractable, 3/4 in Max Line Opening
OverviewThe Attwood Marine 66502-1 is a retractable fender cleat built for securing fender lines while keeping deck hardware low when it is not in use. It measures 3-1/2 in. long, 1-3/16 in. wide,...$26.99 -
Attwood Marine Oval Navigation Light Base, For Angled Pole Lights, 2-Pin, 7.5 Degree Angle, Black Housing
OverviewThe Attwood Marine 91022-7 is an oval 2-pin base for angled pole lights with locking collars. It mounts in tight spots such as narrow gunwales and deck sections, and it sets the pole at a 7.5...$16.99 -
Sold out
Attwood Marine HD 1700 Heavy-Duty Bilge Pump, 12V, 1700 GPH, Non-Automatic, 1-1/8 in Outlet
OverviewThe Attwood Marine 4730-4 is a 12V heavy-duty bilge pump that moves up to 1700 GPH at open flow, draws less than 6 amps, and uses a 1-1/8 in. I.D. discharge hose. It is fully submersible and...$153.71Out of stock