Overview

The Vimar Plana Series is a range of interchangeable RF switch buttons for compatible Vimar radiofrequency controls. These buttons are used with Plana EnOcean, Bluetooth, and ZigBee RF devices and come in either a pair of 1-module buttons or a single 2-module button. The range uses halogen-free thermoplastic with a glossy surface and is rated IP40, so it belongs in protected interior spaces rather than exposed exterior panels.

This is a finishing and replacement part, not the RF device itself. On a boat, it suits cabin lighting controls, interior scene switches, and enclosed helm panels where you need the button format and color to match an existing Plana installation.

Key features

• Made for compatible Vimar Plana RF controls in EnOcean, Bluetooth, and ZigBee systems
• Available as two separate 1-module buttons or one 2-module button, depending on the switch face already fitted
• Halogen-free thermoplastic body with glossy surface
• IP40 rating for protected interior installations
• White and silver finish options for matching existing Plana trim
• Replacement button set only, not the RF switch electronics

Variants

This range is offered in four configurations that change the finish and the button layout.

The variable points are color and module format. The 1-module versions are supplied as two separate buttons, while the 2-module versions use one full-width button. Across the range, the function stays the same: interchangeable buttons for compatible Plana RF controls.

• VM14506.SL: Silver finish, 1-module button set with 2 units. This version gives you two separate buttons for a layout that uses two 1-module buttons and carries the lacquered silver surface.
• VM14506: White finish, 1-module button set with 2 units. This version gives you two separate buttons for a layout that uses two 1-module buttons.
• VM14506.2.SL: Silver finish, 2-module button. This is the single-piece option for assemblies that use one 2-module control face and it carries the lacquered silver surface.
• VM14506.2: White finish, 2-module button. This is the single-piece option for assemblies that use one 2-module control face.

Compatibility and fit

Check the existing switch face before ordering. Installations built around two separate 1-module buttons need the pair format, while installations built around one full-width control face need the 2-module format. These buttons complete compatible Plana RF switch hardware and do not replace the radio transmitter, frame, or cover plate.

IP40 construction makes these buttons a fit for dry interior areas such as the cabin, saloon, berth spaces, or an enclosed console. They are not meant for open deck locations, washdown zones, or any position that takes direct spray.

Use on board

This product fits boats that already use Vimar Plana smart switching and need a replacement button set or a finish change without changing the underlying control hardware. It is a straightforward match for refits where the electronics stay in place and the visible button layout or color needs to match the rest of the panel.