Overview

The Attwood Marine NV6LC1-14A7 is a 14 inch angled LightArmor bi-color LED navigation pole light with a 2-pin locking collar connection and IP67 water resistance.

It combines red and green bow lighting in one plug-in assembly and uses an LED light engine rated for 50,000+ hours. The light meets EN/ISO 19009:2015 and carries 2-mile visibility, which helps when you are matching replacement lighting to a compliant setup on a trailer boat or runabout.

This is the aftermarket 14 inch angled version in the NV6LC1 series, so base fit matters. If you are replacing an existing pole light, match the 2-pin connection, pole length, and angled style before ordering so it drops into the current base without changing the mounting point.

Key features

• 14 inch angled bi-color pole light with red and green output in one assembly
• 2-pin locking collar connection for Attwood LightArmor plug-in bases
• LED light engine rated for 50,000+ hours
• IP67 water resistance with corrosion-resistant construction for exposed bow use
• 2-mile visibility with EN/ISO 19009:2015 compliance
• Color-marked wire cores and tell-tale indicators help with wiring and operation checks

Compatibility and fit

This model is the aftermarket 2-pin locking collar version in the NV6LC1 series. It works with Attwood LightArmor plug-in bases 910R2, 901V2, 910T2, 2520, 911339, and 911370. On 2520, 911339, and 911370 bases, the locking collar is removed.

The angled 14 inch format matters on boats where the existing bow light height and mounting geometry are already set. It is a practical match when you need the same pole profile rather than switching to a straight pole or a fixed deck light.

Installation and use

Color-marked wire cores make hookup easier, and the LED module runs cool in use. The tell-tale indicators make it easier to confirm the light is on without leaning over the bow at night.

This light suits owners replacing a worn plug-in bow pole on small powerboats and fishing boats that already use a compatible LightArmor base. It also fits refits where longer LED life and IP67 sealing matter, but the existing base system is staying in place.