Raymarine Axiom 2 Pro 12 in Sun Cover

Overview

The Raymarine A80742 is a sun cover made for the Raymarine Axiom2 Pro 12-inch multifunction display. It fits the Axiom2 Pro 12 display face when the unit is not in use, helping shield the screen and controls from direct sun, salt spray, dust, and everyday dockside exposure.

This is a practical replacement or spare cover for boats where the display stays mounted at the helm, flybridge, cockpit, or wheelhouse. It is especially useful on open stations where electronics can sit in bright sun between trips or while the boat is stored at the dock.

Key features

• Fits Raymarine Axiom2 Pro 12-inch displays for a proper match to the display size and front profile.
• Helps protect the chartplotter screen and keypad area when the display is powered down or the boat is unattended.
• Useful for helm stations, cockpits, flybridges, and other exposed mounting locations.
• Simple slip-on cover format makes it easy to remove before getting underway and reinstall after use.
• Good option for replacing a lost, worn, or damaged original cover without changing the display installation.

Compatibility and fit

This cover is for the Axiom2 Pro 12-inch display size. It should not be used as a fit reference for Axiom2 Pro 9-inch or 16-inch models, or for other Raymarine Axiom families, because the front dimensions and cover profiles differ by model.

Use on board

For cruising boats, fishing boats, and sailboats with fixed electronics at the helm, a fitted sun cover helps keep the display face covered between runs without removing the MFD from the mount. It is a small accessory, but it can make daily use easier on boats that see sun, spray, and dockside debris.

Care and handling

Rinse off salt and grit before wiping the cover or the display area, especially after rough passages or washdowns. Let the cover dry before long storage periods, and avoid forcing it over a display that has accessories or obstructions interfering with the normal fit.