Overview

The Attwood Marine 9092-5 is a battery tray with strap for one Group 24 or 24M battery. It fits batteries up to 10-1/2 in. tall and uses a 7 in. x 11 in. tray footprint, which works well in battery compartments where space is tight but the battery still needs a secure hold-down.

The tray uses a molded base and a polypropylene hold-down strap with a positive-locking, quick-disconnect buckle. That layout keeps the battery easy to remove for charging, seasonal service, or replacement without dealing with a fixed top bracket.

Key features

• Fits one Group 24 or 24M battery up to 10-1/2 in. tall.
• 7 in. x 11 in. tray footprint for installations with limited room.
• Polypropylene hold-down strap with a positive-locking, quick-disconnect buckle.
• Molded base mounts with four #10 panhead fasteners.
• Open tray layout keeps the battery accessible for inspection and replacement.

Installation and fit

This tray suits boats that already have a dedicated battery shelf or compartment and do not need a full battery box. Before ordering, match the battery group size, confirm the battery height stays within the 10-1/2 in. limit, and make sure the mounting surface can accept four #10 panhead fasteners.

Because it is an open tray with a strap hold-down, it is a practical option for repowers, battery replacements, and simple single-battery setups where the battery needs to stay easy to reach. On many boats that means under a console, inside a side compartment, or on a transom battery shelf.

Maintenance and care

As with any battery restraint on board, it is worth checking the strap, buckle, and mounting points during routine service. A quick inspection after the first few trips and at seasonal battery changeout helps catch loosened hardware before it becomes a problem.