TACO Marine Poly Premium Trailer Glyde Slicks, 2 ft, 1-1/2 in Wide, 7/16 in Thick, 6pk

Overview

The TACO Marine P06-06W is a 6-pack of 2 ft premium trailer glyde slicks made for boat trailer bunks, helping the hull move across the runners with less friction during launch and retrieval. Each slick measures 2 ft long, 1-1/2 in wide, and 7/16 in thick, giving trailer owners a practical way to refresh carpeted or bare bunks without replacing the full bunk structure.

These white poly slicks are suitable for aluminum, fiberglass, and wood boats up to 2,000 lb. They help spread the boat’s weight along the bunk surface, which is useful at ramps where a boat needs to slide on and off cleanly without heavy winching or repeated repositioning.

Key features

• Six 2 ft slicks cover common trailer bunk contact areas for smoother launch and loading.
• Poly surface reduces friction between the hull bottom and trailer runners.
• Works on carpeted bunks or bare bunks, depending on the trailer setup.
• Suitable for aluminum, fiberglass, and wood boats up to 2,000 lb.
• Each slick measures 2 ft L x 1-1/2 in W x 7/16 in thick for predictable fit planning.
• Stainless steel mounting screws are included for trailer use in wet environments.

Installation and fit

These slicks mount directly to the bunk contact surface, so they are a good match for trailers where the boat drags against carpet, bare wood, or worn runner surfaces during retrieval. Before installation, check the bunk layout and place the slicks where the hull normally bears weight, rather than treating them as decorative trim.

Because the slick surface lets the boat move more freely, the winch strap and safety chain should stay secured until the boat is ready to launch. On retrieval, the reduced friction can make centering and final winching easier, especially for lighter fishing boats, skiffs, utility boats, and small runabouts within the stated weight range.

Materials and trailer use

The poly construction is well suited to trailer duty because it does not hold water like carpet and gives the hull a smoother contact surface at the ramp. The white finish also keeps the slicks visually easy to inspect when checking bunk coverage, screw placement, or wear during normal trailer maintenance.

What’s included

• 6 trailer glyde slicks
• 24 #10 x 1 in serrated truss head 18-8 grade stainless steel screws
• Installation instructions