Overview

The Victron Energy BPP900465050 is a GX Touch 50 Wall Mount for installing a Victron GX Touch 50 display on a solid vertical surface without making a large panel cut-out. It is a practical choice for boats where the display needs to sit on a bulkhead, helm panel, cabin wall, or equipment space face rather than being recessed into cabinetry.

The mount fixes to the wall with three screws, while the display cable passes through the opening in the mount before the GX Touch 50 is clipped into place. This keeps the installation straightforward and leaves the screen accessible for monitoring and controlling a Victron onboard power system from a convenient location.

This wall mount is for the 5-inch GX Touch 50 display. It is not the same size as the GX Touch 70 mount, so matching the mount to the display model is the main fit check before installation.

Key features

• Made for the Victron GX Touch 50 display, giving the 5-inch screen a wall-mounted installation option.
• Mounts to a solid wall with three screws, with no large cut-out needed for the display body.
• Built as a wall-mount enclosure, useful when a flush-mount opening is not wanted or not practical on a boat.
• Cable routing through the mount opening helps keep the display connection clean behind the screen.
• Optional cable pull relief can be made by folding the cable around the internal pin during installation.
• Suitable for helm stations, navigation areas, cabins, electrical panels, and other protected onboard locations where GX system visibility matters.

Installation and setup

Installation is focused on positioning and fastening the wall mount securely. The mount is first fixed to the chosen surface with three screws, then the GX Touch display cable is pulled through the opening. The display is inserted on the right side of the mount and then pressed into place on the left side.

On a boat, the mounting surface should be solid enough to hold the display steady through vibration and normal movement underway. A location near the vessel’s Victron control hardware can reduce cable routing work, while a helm or cabin location may make the screen easier to read during daily operation.

Compatibility and fit

This mount is sized for the GX Touch 50. It does not add electrical functions and does not change the voltage, network, or communication compatibility of the GX system. Its job is mechanical mounting, so the key compatibility point is confirming that the display being installed is the GX Touch 50 rather than the larger GX Touch 70.

It is a good match for owners and installers who want the GX Touch screen visible without cutting a precise display opening into a panel. That can be helpful on refits, compact helm layouts, and installations where preserving existing cabinetry or bulkhead surfaces matters.