Overview

The Vimar Idea 16764 Rondò is a 4-module cover plate for Vimar Idea switch and outlet layouts, with clamp mounting, horizontal or vertical orientation, and a face size of 148 x 82 mm. It sits close to the panel at 9 mm deep and includes a label space, which helps when several functions share the same control area.

On board, this kind of plate works best in protected interior locations where you want a clean finish around grouped controls or sockets. The IP00 rating means it is a trim and finishing piece rather than a sealed exterior part, so it belongs on cabin panels, sheltered helm sections, wall ducts, or built-in installations that stay out of spray and washdowns.

The body is halogen-free thermoplastic, and the range covers both glossy technopolymer finishes and matt Silk finishes. That gives you the same 4-module layout across the line while letting the visible face match the rest of the electrical trim on the boat.

Key features

• 4-module cover plate for the Vimar Idea series, with room for four modules horizontally or one module vertically.
• Clamp mounting and mounting grid for a secure fit on compatible Idea installations.
• Horizontal or vertical mounting direction, which helps when space on the panel is wider than it is tall, or the other way around.
• 148 x 82 mm overall size with 9 mm depth, useful when checking trim clearance on refit panels.
• Label space on the plate for identifying grouped functions such as lighting, pumps, outlets, or auxiliary controls.
• Halogen-free thermoplastic construction; technopolymer versions use a glossy face, while Silk versions use a matt lacquered finish.

Variants

This range changes by color and finish. Technopolymer versions are available in Black, Bright White, Graphite Gray, and Idea White. Silk versions are available in Black, Graphite Gray, and Idea White.

Across the range, the format stays the same: 4 modules, clamp mounting, horizontal or vertical orientation, label space, and 148 x 82 x 9 mm dimensions. The main visual difference is the face finish, with glossy technopolymer options and matt Silk options for a softer look on the panel.

Compatibility and fit

This cover plate is meant for installations built around the Vimar Idea system. It makes sense when the boat already uses Idea modules and you need a 4-module trim plate that lines up with the existing support and front finish.

It is a good match for grouped switch banks, outlet clusters, and other interior control points where the wiring devices are already protected behind the panel. The plate also suits built-in installations, wall ducts, and similar enclosed mounting arrangements.

Use on board

For marine refits, it fits best in cabins, companionway bulkheads, nav stations, utility lockers, and sheltered helm consoles. The label area is useful where several nearby controls need to stay easy to identify during routine use or night passages.

Because this is an IP00 cover plate, it is better suited to dry or well-sheltered spaces than open deck locations. Boats that need trim around interior electrical points without changing the 4-module Idea layout are the natural fit for this range.