Overview

The Garmin 010-12407-00 is a trolling motor shaft mount for attaching a Panoptix PS21 transducer to the shaft of your trolling motor.

It uses an adjustable bracket that fits a wide range of shaft diameters, including many Minn Kota and MotorGuide setups, so the transducer can be secured on the shaft without drilling the motor housing.

This mount is a solid match for bow installations where you want the transducer fixed to the steering shaft and turning with the motor as you scan.

Key features

• Mounts a Panoptix PS21 transducer on the shaft of a trolling motor
• Adjustable design to suit most shaft diameters, including popular Minn Kota and MotorGuide shafts
• Bracket secures with set screws and a thumb screw to help hold position during normal trolling motor use
• Shaft mounting keeps the transducer aligned with trolling motor steering for bow-mounted viewing

Installation and setup

Position the bracket on the shaft where the transducer will clear the prop area and still allow the trolling motor to stow and deploy without contacting the mount. Once aligned, tighten the set screws evenly and recheck after the first trip, since initial vibration can loosen hardware.

Route the transducer cable up the shaft with enough slack for steering and lift movement, then secure it so it cannot snag the deploy mechanism or rub on sharp edges.

Compatibility and fit

This mount is intended for Garmin Panoptix PS21 transducer installations on trolling motor shafts. The clamp-style bracket covers a wide range of shaft diameters, but it is still worth confirming clearance around your shaft, steering collar, and stow cradle before heading out.

Maintenance and care

After saltwater trips or heavy washdowns, rinse the mount and check fasteners for buildup. A quick check of screw tightness as part of routine boat prep helps keep the transducer from shifting over time.

What's included

• Bracket
• 4 set screws
• Thumb screw