Overview

The Garmin 010-13307-05 is a foot control mount kit for replacing the power steer foot pedal assemblies on a compatible Force Current kayak trolling motor. It is used when the existing pedal setup needs to be brought back into service after wear or damage.

This kit is an accessory for the Force Current foot control system, not a complete trolling motor. Confirm your trolling motor model is Force Current and that your setup uses the power steer foot pedals before ordering.

Key features

• Replacement mount kit for the Force Current kayak trolling motor foot control setup
• Service replacement for the power steer foot pedal assemblies
• Keeps steering control at your feet so you can make direction changes without taking your hands off other tasks
• Useful for restoring the pedal setup after impact damage, heavy use, or missing parts during transport
• Made for Force Current compatibility where the power steer foot pedals are used

Compatibility and fit

This mount kit is for the Garmin Force Current kayak trolling motor. If you run a different trolling motor family, or your system does not use the power steer foot pedal setup, fit and function will not match.

Installation and setup

Plan the pedal location so it is comfortable from your normal seating or standing position and does not interfere with hatches, gear tracks, or foot braces. Any new deck penetrations should be sealed properly to keep water out of the hull, and the mounting area should be supported so the pedals do not flex the deck under use.

After mounting, cycle steering through its full range and confirm the pedals move freely without binding. If you fish in sand or mud, keep grit from packing around the pedal area so the mechanism stays easy to operate.

Use cases on board

This is a good match for kayak anglers and small craft owners who rely on foot steering with a Force Current and need to get the pedal assemblies back in place after wear, damage, or a lost component. It is also a practical spare to keep on hand for trips where you cannot afford downtime on the water.

Maintenance and care

Rinse the pedal area with fresh water after saltwater use and clear debris that can collect around moving parts. Periodically check the mounting points for loosening from vibration and re-tighten as needed.