Overview

The Garmin 010-13307-25 is a replacement skeg for the Force Current kayak trolling motor. It bolts onto the lower unit to take the first contact when the motor touches bottom, a ramp edge, rocks, or dock hardware, helping protect the motor body and prop area where impacts usually do the most damage.

This is a straightforward mechanical replacement part with no wiring, pairing, or setup in your 12V or 24V system. It is a practical swap when the original skeg is chipped, cracked, or worn from repeated shallow-water use, and it is also the kind of small spare that can save a day on the water when you are traveling or launching in unfamiliar spots.

Key features

• Replacement skeg for Garmin Force Current kayak trolling motor lower unit
• Helps reduce damage from bottom strikes, ramp contact, and underwater debris
• Restores the protective profile of the lower unit after the original skeg is worn or broken
• No electrical connections or network integration required
• Useful spare to keep onboard for remote launches and shallow-water fishing

Compatibility and fit

Fit is specific to the Garmin Force Current kayak trolling motor. Confirm your motor model before ordering, especially if you are also looking at parts for other Garmin trolling motors that use different lower units and hardware.

Installation and setup

Installation is a simple replacement at the lower unit. Power the motor off, secure it so the lower unit is easy to reach, remove the damaged skeg, then install the new skeg in the same location and recheck fasteners after the first outing.

Maintenance and inspection

Give the skeg a quick look anytime you have a hard strike, drag through a rocky launch, or spend time in very shallow water. Rinse the lower unit after saltwater use, and replace the skeg if you see cracking, heavy abrasion, or damage that could expose the motor housing to direct impact.