Garmin Adjustable Handheld Mount, Surface Mount

Overview

The Garmin 010-13992-00 is an adjustable handheld mount for securing a compatible Garmin handheld device to a flat surface. On a boat, it gives a GPS or satellite communicator a fixed place at the helm, nav station, cabin bulkhead, or other flat mounting area where it can stay visible and within reach instead of sliding around loose gear.

This mount is a mechanical accessory with no wiring, network setup, or power draw, so fit comes down to device compatibility, mounting surface, and the required Garmin adapter for certain models. Screws are not included, which lets the installer select fasteners that suit the surface material and thickness.

Key features

• Adjustable mount lets a compatible handheld device be positioned for easier viewing from a fixed flat surface.
• Useful for boats where a handheld GPS or satellite communicator needs a steady place near the helm, chart table, cabin, or protected cockpit area.
• Compatible Garmin handheld device required, with a compatible Spine Mount Adapter sold separately when used with an inReach Mini 3 device.
• Compatible Cradle Mount sold separately is required when used with an inReach Messenger device.
• Screws are not included, so mounting hardware can be matched to the vessel surface and installation location.

Installation and setup

Mount the unit on a flat surface that gives the handheld a clear viewing angle and enough clearance to attach and remove the device. Before drilling, test the position from the normal operating spot on board and check behind the surface for wiring, liners, or hardware that could be affected by the fasteners.

Because the fasteners are not supplied, use screws suitable for the surface and marine environment. For fiberglass, aluminum, or coated panels, pilot holes, backing, bedding, and corrosion-aware hardware selection are worth considering so the mount stays steady under vibration and regular boat movement.

Compatibility and fit

This mount is intended for compatible Garmin handheld devices. For inReach Mini 3 use, plan on adding the required compatible Spine Mount Adapter. For inReach Messenger use, plan on adding the required compatible Cradle Mount. Those accessories are separate from this mount and should be checked before installation so the complete mounting setup matches the device on board.

Use on board

This is a practical fit for boaters who use a Garmin handheld as a secondary navigation reference, satellite communicator, or portable device that needs a repeatable location during coastal runs, fishing days, paddling, or dockside planning. It works best in a spot where the device is easy to see but not in the way of controls, lines, hatches, or routine movement around the boat.