Overview

The Vimar VM20660.01 is a 14-module Eikon square cover plate made from white technopolymer, sized 206 x 152 mm with a 10.5 mm depth.

It finishes a larger Vimar modular switching station by covering the mounting frame and the cutout edges around the modules, leaving a border that looks clean and stays even around your switches, outlets, and chargers.

On boats it is commonly used for helm switch banks and cabin lighting panels where several functions are grouped in one place and you want a single faceplate across the whole run.

Key features

• 14-module cover plate for Eikon-format modular devices and matching frames
• White technopolymer (plastic) construction with a square bezel style
• Overall dimensions: 206 x 152 mm
• Depth: 10.5 mm
• Halogen-free material

Compatibility and fit

This plate is sized for a 14-module layout, so confirm the module count of the mounting frame behind your panel or wall opening before ordering.

It is meant for Vimar Eikon-style modular devices and frames rather than standard North American wall plates. For a clean fit, keep the plate, frame, and modules in the same system.

Installation and setup

Install after the devices are wired and secured in the mounting frame. Once the frame is straight and sitting flush to the surface, fit the cover plate over it and check that each module opening is centered.

In areas that see vibration and regular handling, take a moment to deburr the cutout and tuck wiring back so the plate can sit flat without rocking.

Use on board

This cover plate suits refits and new builds that use a wider run of Vimar modules, such as grouped lighting controls at the companionway, a multi-function helm switch panel, or a cabin area combining switching with outlets or charging ports.

Maintenance and care

Wipe with fresh water and a mild cleaner. Avoid harsh solvents that can haze or soften plastics.