Overview

The Simrad 000-16218-001 is a protective suncover made to fit the NSX3012UW ultrawide 12-inch multifunction display. It shields the screen when the boat is sitting at the dock, on a lift, or on the trailer, cutting down on sun exposure and helping keep dust and salt residue off the glass.

Because it is shaped for the NSX3012UW face, it stays in place over the display and comes off quickly when you are ready to run. If your helm is out in the weather, this cover is a simple way to keep the screen cleaner between trips.

Key features

• Model-specific suncover for the Simrad NSX3012UW ultrawide 12-inch display.
• Covers the screen and bezel to reduce direct sun exposure while the unit is not in use.
• Helps keep dust, salt spray, and light washdown splashes off the display face between outings.
• Installs and removes without tools for quick protection at the dock or on the trailer.
• Useful for open helms such as center consoles and flybridges where the display sits in full sun.

Compatibility and fit

This cover is intended for the NSX3012UW display only. Sun covers are size and shape specific, so a cover for a standard NSX 3012 or a different NSX ULTRAWIDE model will not seat correctly.

A quick check is the model marking on the display or in the unit information screen. Matching the model to NSX3012UW is the easiest way to confirm fit before ordering.

Installation and day-to-day use

Use the cover whenever the boat is parked, stored, or trailered. It is especially helpful after a rinse-down, since it keeps the screen from collecting airborne dust while the helm dries.

For boats that live on a mooring or spend a lot of time uncovered, keeping the cover on between runs helps reduce screen cleaning and keeps glare and salt film from building up.

Maintenance and care

Rinse the cover with fresh water if it picks up salt, then let it dry before stowing it below. Avoid harsh cleaners or solvents that can dull plastics over time.