Overview

The Vimar Eikon 20683 is a 3-module round cover plate for Eikon switch and outlet assemblies. Across the range, the outer size stays at 120 x 80 mm with a 9 mm depth, and the plate can be mounted horizontally or vertically. It is used with the Vimar 21613 frame, so this is the finishing plate for the assembly rather than the electrical device itself.

This range covers both metal and wood finishes. Matte Anthracite, Arctic White, Metallic Titanium, Matte Titanium, and Bright Titanium are metal versions, while White Oak and American Cherry use a solid wood face with a chromed frame. The plate is halogen-free and CE marked.

On board, this style fits best in protected interior spaces such as cabins, salons, berth areas, and enclosed helm stations. With an IP00 rating, it is not meant for exposed weather, spray, or washdown locations.

Key features

• 3-module round cover plate for the Vimar Eikon series
• 120 x 80 mm face size with 9 mm depth
• Fits Vimar frame 21613
• Can be mounted horizontally or vertically
• Finish range includes metal options plus White Oak and American Cherry solid wood versions
• Halogen-free construction with CE marking
• IP00 trim plate for protected interior installations

Variants

The difference across this range is the finish and, in some versions, the face material. The listed options cover matte anthracite, Arctic White, metallic titanium, matte titanium, bright titanium, White Oak, and American Cherry.

The metal finishes keep the Eikon round look for a clean switch or outlet panel, while the wood finishes change the visual style without changing the 3-module format. White Oak and American Cherry use a solid wood face with a chromed frame.

Compatibility and fit

This plate is made for a 3-module Eikon assembly and pairs with the 21613 frame. Before ordering, check that your switch, outlet, or control layout uses the same 3-module format and that the mounting point has room for the 120 x 80 mm outer size.

Because the plate can be mounted in either direction, it works for switch banks on a bulkhead, berth lighting points, and interior outlet positions where panel orientation matters.

Use on board

This is a good match for refits in cabin and salon switch areas, or for new builds that need Eikon trim to line up with the rest of the interior finish. It also suits installations where the faceplate needs to sit neatly with nearby joinery, upholstery tones, or helm trim.