Vimar Eikon EVO 21653 Cover Plate, 3-Module, Clamp Fixing, For Support 21613
-
Perfect Fit, Guaranteed
Get the right part every time
-
Expert Support
Our in-house specialists know our products inside and out
-
Enhanced Value & Service
We go beyond the sale with professional and balanced services
-
Wordwide Delivery
Enjoy hassle-free worldwide delivery
Vimar Eikon EVO 21653 Cover Plate, 3-Module, Clamp Fixing, For Support 21613
Write a Review
Vimar
Vimar Eikon EVO 21653 Cover Plate, 3-Module, Clamp Fixing, For Support 21613
Overview
The Vimar Eikon EVO 21653 is a 3-module cover plate that finishes the opening around Eikon switches, outlets, and control modules, leaving a clean edge on the wall or panel.
Overall size is 117.30 mm wide by 105.30 mm high with 9.80 mm depth. It uses clamp mounting and can be installed horizontally or vertically to suit the way your modules are laid out.
This plate is rated IP00, so plan on fitting it in dry interior areas such as cabins, saloons, and protected consoles. For locations that see spray or washdowns, use a separate weatherproof cover system around the devices.
Key features
- 3-module format for Vimar Eikon installations.
- 117.30 x 105.30 mm outside dimensions with 9.80 mm depth.
- Clamp mounting for a secure fit on the matching 3-module mounting frame and box.
- Mounts horizontally or vertically without changing the plate.
- IP00 rating for protected interior mounting locations.
Variants
The 21653 range is offered in a wide mix of finishes so you can match surrounding joinery and the rest of your switchgear. Options include multiple aluminium colors, polished or satin gold tones, and neutral shades such as white, grey, and black.
There are also versions with solid wood, natural leather, Corian, carved stone, and crystal style surfaces. All variants remain the same 3-module cover plate format, with the visible finish being the main difference between configurations.
Compatibility and fit
This plate is made for Vimar Eikon 3-module wiring devices used on many yachts and similar installations. Confirm the module format is Eikon and that the mounting frame and box behind your devices are sized for three modules before ordering.
If you are replacing an existing plate, measure the outside footprint and check that nearby trim or door frames leave enough clearance for the 117.30 x 105.30 mm face.
Installation and placement on board
On board, these plates are commonly used on interior bulkheads, furniture panels, and console fascias for lighting circuits, outlet groups, and system controls. A flat mounting surface helps the plate sit flush and keeps the edges from catching on clothing or cleaning cloths.
Because the plate itself is not weather sealed, keep it out of direct cockpit spray and deck washdowns unless the installation is protected by a separate enclosure intended for wet areas.
Care and finish notes
Clean with a soft cloth, mild soap, and fresh water, then dry. Avoid abrasive pads and strong solvents, especially on leather, wood, stone, Corian, and crystal finishes.
Use cases on board
It suits refits where you already run Vimar Eikon modules and want a consistent finish across cabin lighting controls, berth reading lights, and equipment switches on an interior console.
For new builds, it keeps the switch plate layout consistent across staterooms and the saloon while letting you choose a finish that matches the interior theme.
We ship all in-store (FL) stock orders the same day if placed before 3 PM EST, Monday through Friday. Orders placed after this time will ship the next business day. Orders fulfilled from other warehouses or manufacturers may not ship the same day. If an item is out of stock, we will notify you promptly.
Related Products
Vimar Eikon Mounting Frame and Protection Cover, 3-Module
Vimar Eikon EVO British Standard 3-Module Cover Plate
Vimar Eikon EVO 21642 2-Module Cover Plate, Square, Clamp Mount
Vimar Eikon EVO 4-Module Cover Plate, 2+2 Layout, 71 mm Centers, Horizontal/Vertical Mount