Overview

The Simrad 000-13752-001 is a pair of edge bezels for 16-inch NSS16 evo3/evo3S and Zeus3 16/Zeus3S multifunction displays. They fit along the display edge to tidy up the panel cutout and give the helm install an edge that looks finished.

This is trim only, so it does not change power, networking, charts, sonar, or any other system connections. It makes sense for flush-mount and glass-helm style installs, or for replacing trim that has been scratched during refits and electronics swaps.

If you are matching an existing dash layout, confirm the exact display generation and the 16-inch size. Other NSS and Zeus models use different bezel kits even when the screens look similar at a glance.

Key features

• Fits Simrad NSS16 evo3 and NSS16 evo3S 16-inch displays
• Also matches B&G Zeus3 16 and Zeus3S 16 installations
• Supplied as a pair for a consistent edge finish around the display opening
• No wiring or software setup required
• Helps cover small gaps between the display chassis and the dash surface for a cleaner helm face

Compatibility and fit

These bezels are specific to the NSS16 evo3/evo3S and Zeus3 16/Zeus3S platform. Before ordering, check the model marking on the display and confirm you are working with the 16-inch unit, since other sizes use different trims.

Installation and care

Plan to fit the bezels after the display is secured in the dash or panel. Dry-fit first to make sure the trim sits flat and does not interfere with nearby switches, instrument rings, or canvas hardware. For cleaning, mild soap and water is usually all that is needed; avoid harsh solvents that can haze plastics.

What's included

• Edge bezels (pair)