Raymarine RayMic260 Handset Extension Cable, For RAY260, 10m

Overview

The Raymarine A80201 is a 10 m extension cable for a RAY260 handset, used when the handset needs to be mounted farther from the Ray260 base station.

This cable helps keep the VHF controls where they are easy to reach, such as at the helm, flybridge, cockpit station, or another operating position on board. The 10 m length gives installers more routing flexibility through consoles, bulkheads, and equipment spaces while keeping the Ray260 handset connected to the base unit.

Waterproof twist-lock connectors help protect the connection point in exposed marine locations where spray, washdowns, and vibration are part of normal use.

Key features

• 10 m extension length for adding distance between the Ray260 base station and handset.
• Made for use with Raymarine RAY260 and RayMic260 handset installations.
• Waterproof twist-lock connectors help secure the handset connection in marine environments.
• Useful for helm, cockpit, flybridge, or secondary station layouts where the handset needs to be closer to the operator.
• Supports cleaner cable routing through consoles and bulkheads during VHF system installation.

Installation and setup

Route the cable between the Ray260 base station and the handset location, allowing enough service loop at each end so the connectors are not under tension. The twist-lock connectors should be fully seated and locked before the cable is secured along the run.

During installation, avoid sharp bends, pinch points, and areas where the cable may rub against metal edges or moving equipment. Keeping the connection accessible makes future inspection or handset relocation easier.

Compatibility and fit

This extension cable is intended for Raymarine RAY260 handset systems. It is a fit-focused accessory for installations where the standard handset cable run does not reach the preferred mounting position.

Before installation, confirm the existing radio system is a Raymarine RAY260 setup and check the planned cable path to make sure the 10 m length is appropriate for the vessel layout.

Use cases on board

This cable suits boats where VHF operation needs to be moved closer to the primary helm or added to a more convenient station. It is especially practical on vessels with enclosed electronics spaces, raised helms, flybridges, or cockpit control areas where the base station and handset cannot sit close together.

What’s included

• Raymarine 10 m extension cable for RAY260 handset