-
Blue Sea Systems Common BusBar Cover, For 2301 and 2303
OverviewThe Blue Sea Systems 2715 is a common busbar cover for Blue Sea Systems 2301 and 2303 busbars. It fits the 2301 Common 150A BusBar - 10 Gang and the 2303 Common 150A BusBar - Four 1/4"-20...$5.99 -
Blue Sea Systems MiniBus BusBar Cover, For 2304 and 2305
OverviewThe Blue Sea Systems 2713 is a MiniBus busbar cover made to fit Blue Sea Systems 2304 and 2305 busbars in installations where space is tight. It matches MiniBus setups used up to 100A AC/DC,...$5.99 -
Blue Sea Systems DualBus 100 BusBar Cover, Snap-On, Polycarbonate
OverviewThe Blue Sea Systems 2710 is a snap-on cover for the DualBus 2702 busbar, sized to shield the terminal area while still leaving wire runs accessible. It is a small but useful finishing piece...$22.99 -
Blue Sea Systems DualBus 100 BusBar Cover, For DualBus 2701, Polycarbonate
OverviewThe Blue Sea Systems 2709 is a snap-on cover for the Blue Sea Systems 2701 DualBus 100A bus bar. It measures 4-3/16 in. long, 7/8 in. high, and 2-1/2 in. wide, so it matches the 2701...$21.99 -
Blue Sea Systems PowerBar BusBar Cover, For 2104, Polycarbonate
OverviewThe Blue Sea Systems 2708 is a busbar cover sized for the Blue Sea Systems PowerBar 2104. It measures 8.500 x 3.375 x 2.750 inches and fits over the 2104 busbar to put a physical barrier over...$37.99 -
Blue Sea Systems Battery Terminal Mount BusBars, 100A, 32V, Tin-Plated Copper
OverviewThe Blue Sea Systems 2340 is a battery terminal mount busbar set that adds positive and negative connection points directly at a threaded-post battery terminal. It is rated for 32V DC and...$38.99 -
Blue Sea Systems PowerBar Dual BusBar, 200A, 48V DC, Two 3/8"-16 Studs, Tin-Plated Copper
OverviewThe Blue Sea Systems 2020 is a compact DC power busbar for bringing two heavy-current cable terminations to one common connection point on board. It uses two 3/8"-16 studs, is rated up to...$25.99 -
Blue Sea Systems PowerBar Dual BusBar, 200A, 48V DC, 3/8"-16 Studs, Tin-Plated Copper, With Insulators
OverviewThe Blue Sea Systems 2019 is a dual-stud common busbar for creating a single high-current connection point in DC systems up to 48V. It uses two 3/8"-16 studs and carries up to 200A, so it...$34.99 -
Sold out
Blue Sea Systems M2 OLED Temperature Monitor, 7-70V DC, Up to 4 Sensors, -40°C to 120°C
OverviewThe Blue Sea Systems 1841 is a panel-mounted OLED temperature monitor for tracking up to four temperature points on board. It runs on 7 to 70V DC, reads from -40°C to 120°C (-40°F to 250°F),...$393.14Out of stock
-
Blue Sea Systems High Temp Temperature Sensor, IP65, -40°F to 300°F, 18 in Wire
OverviewThe Blue Sea Systems 1821 is a high-temperature sensor for monitoring raw water exhaust temperature on a boat without drilling into the pipe. It mounts on the outside of the surface being...$23.99 -
Blue Sea Systems Submersible Temperature Sensor, 10,000 Ohm, IP68
OverviewThe Blue Sea Systems 1820 is a submersible temperature sensor for Blue Sea devices that accept a temperature input. It is rated IP68, uses a 10,000 Ohm sensor at 25°C, and covers a working...$29.99 -
Blue Sea Systems VSM 422 Tank Sender, Gasoline, 24 in Tank Depth
OverviewThe Blue Sea Systems 1811 is a gasoline tank sender for the Vessel Systems Monitor VSM 422. It uses non-contact ultrasonic sensing, can be calibrated for the individual tank through the...$218.99