Overview

The Vimar VM09952.A is a 1-module surface-mount cover with a 50 mm depth for installing a Vimar 8000-series standard module on a wall or ceiling when you do not have room for a recessed box.

It measures 78.5 mm long by 32 mm wide and is rated IP40, so it belongs in interior areas that stay protected such as a helm console, cabin bulkheads, or inside an electrical locker. The rear cable inlet supports clean routing through the mounting surface, and the ivory RAL 9001 finish blends with light-colored panels.

Key features

• Surface-mount format for one 8000-series standard module (1M)
• 50 mm overall depth
• Wall or ceiling mounting
• Rear inlet for bringing wiring through the mounting surface
• Halogen-free plastic body
• IP40 protection level for installations that stay dry and protected
• Ivory RAL 9001 color

Compatibility and fit

This cover is sized for a single Vimar 8000 standard module. Confirm the device depth and the wiring bend radius so the module can seat fully without pinching conductors.

It is not suitable for installing Vimar 08065-series devices.

Installation and wiring notes

Plan cable entry through the rear opening and leave enough service slack to remove the module later. On boats, route conductors so they stay supported and away from sharp edges, vibration points, and moving parts.

Where it works well on a boat

This style of surface cover is useful in refits where you are adding a switch or outlet to a bulkhead or console and a deep cutout is not practical. Because IP40 is not a watertight rating, keep it out of cockpit washdowns and other exposed spray zones.