Overview

The Lumishore 010-14456-00 is a 2 m LUX SL/SNL power extension cable that extends the 6-core connection between a Lumishore LUX strip light driver and a matching LUX SL or LUX SNL strip light.

It is used when the existing cable between the driver and strip light is too short for your planned route, such as running from a dry service space out to cockpit toe-kicks, under-gunwale accents, or inside cabin lockers and cabinetry. Multiple extensions can be joined, but the total extension length in the run should not exceed 15 m.

Key features

• 2 m (approx. 6.5 ft) extension length
• 6-core cable for LUX SL/SNL driver-to-strip wiring
• Extends the driver-to-strip run without needing to rework the lighting layout
• Multiple extensions can be joined, with an overall extension length limit of 15 m

Compatibility and fit

Compatible with Lumishore LUX SL and LUX SNL strip lighting systems that use the 6-core harness between the strip light and its driver. It is not a general-purpose two-conductor LED extension cable.

Installation and routing notes

Route the cable the same way you would any low-voltage lighting harness on a boat: support it, protect it from chafe where it passes through bulkheads, and keep it away from high-heat areas. In wet lockers and bilge-adjacent runs, position connectors and joins high and secure them so vibration cannot work them loose.

Good match for

Boats with LUX strip lighting where the driver is mounted in a protected service area, but the light runs are installed farther away in the cockpit, cabin, or hardtop and need extra reach.