Overview

The Lumishore 010-14458-00 is a 4 m Lux SL/SNL power extension cable that extends the 6-core connection between a LUX strip light and its driver.

It gives you extra reach when the strip light is mounted where it looks best and the driver needs to live somewhere more practical, like inside a locker, behind a console panel, or in a dry service space.

Multiple extensions can be joined, but the total extension length between the driver and the strip light should not exceed 15 m.

Key features

• 4 m extension length for LUX SL and LUX SNL strip light installations
• 6-core in-line cable used between the strip light and the strip light driver
• Useful for remote driver placement while keeping the light run continuous
• Extensions can be combined; keep total extension length at 15 m or less
• Fits clean routing on larger boats where lighting zones are far from the driver location

Compatibility and fit

This cable is intended for Lumishore LUX SL and LUX SNL strip lighting systems that use a 6-core connection between the strip light and the driver. Confirm the connector style on your existing harness before ordering, especially if you are mixing older and newer lighting components.

It does not change how the lighting is controlled; it only extends the physical run between the driver and the strip light.

Installation and routing notes

Route the cable where it will not chafe, and support it at intervals so it cannot vibrate against sharp edges. Keep it clear of hot engine components, moving steering linkages, and any area where water sits.

Leave a small service loop at each end so the connectors are not under tension, and keep connection points out of bilge water and away from places that see regular washdowns.

Use cases on board

This extension is a good fit for long accent-light runs under gunwales, cockpit seating, toe-kicks, or cabin trim where the driver is mounted centrally and the lighting zones are spread out across the boat.