Overview

The Simrad 000-16451-001 is a suncover for the Simrad NSS 4-10 (10-inch) multifunction display. Use it to keep the face of the display covered between runs, at the dock, or on the trailer so sun and spray are not baking onto the screen.

It is a small add-on that makes day-to-day ownership easier on helms that stay exposed. With the cover on, the screen is less likely to get scuffed while wiping down the console or when gear brushes past the display.

Key features

• Fits Simrad NSS 4-10 displays with a 10-inch screen size
• Covers the front of the unit during storage to keep sun, salt residue, and dust off the display
• Helps reduce screen scuffs during washdowns, wipe-downs, and normal cockpit traffic
• Useful for boats kept in open slips, on lifts, or on trailers where electronics see direct weather

Compatibility and fit

This cover is specific to the NSS 4-10 size. Confirm your display model and screen size on the front bezel before ordering, since other NSS 4 screen sizes use different covers.

Installation and use

Place the cover over the display whenever the unit is powered down and you are stepping away from the helm. Remove it before powering the unit on and before using the touchscreen or controls.

After a salty run or a washdown, let the display face dry before covering it so salt crystals and grit are not trapped against the screen.

Maintenance and care

Rinse with fresh water as needed and wipe with a soft cloth. Mild soap is fine for sunscreen, grime, and dock dust. Avoid harsh cleaners and solvents that can haze plastics and leave residue on the cover.