Overview

The Garmin 010-11478-01 is a USB-A to Micro-USB cable used to connect compatible Garmin electronics to a computer for software updates and data transfer. The cable is 3.28 ft (1 m) long and uses a USB 2.0 connection for routine update and file-sync tasks.

On a boat, this is a straightforward way to move routes, tracks, and waypoints between your computer and a compatible unit when you are doing trip planning at the nav station. The Micro-USB end is the small, flat connector, so it is worth confirming your device uses Micro-USB and not mini-USB or USB-C.

Key features

• USB-A (computer) to Micro-USB (device) connection for updates and file transfers
• 3.28 ft (1 m) length suits a laptop at the nav table without a big coil of extra cable
• USB 2.0 interface for stable syncing and update sessions
• Built-in ferrite choke to help reduce high and low frequency interference from nearby electronics
• Useful spare to keep in an electronics kit for trips away from the dock

Compatibility and fit

This cable fits devices with a Micro-USB port. Many Garmin products use a different connector, so check the port shape on your unit before ordering. The computer end is a standard USB-A plug; computers with USB-C only will need an adapter (not included).

Installation and setup

Plug the Micro-USB end into the device and the USB-A end into your computer. Depending on the model, the unit may appear as a removable drive for file transfer or be managed through Garmin update software for firmware and content updates. For the most reliable connection onboard, make the connection in a dry spot and keep strain off the plug if the boat is moving.

What's included

• Garmin Micro-USB to USB-A cable

Maintenance and care

After use around saltwater, wipe the connectors and let everything dry before stowing. Avoid leaving the Micro-USB end plugged in where it can get spray or washdown water, and protect the device port with its cap when available.