Overview

The Vimar Mille Series is a portable 2P+E 10A P11 axial socket outlet for 250V AC circuits. It uses straight cable entry, a screwed terminal connection, and a thermoplastic body that is halogen free, with IP20 protection for sheltered locations.

This is the kind of outlet used at the cable end rather than as a panel fitting, so it suits service leads, replacement cord sets, and onboard appliance connections where the cable needs to enter in line with the socket body. It is built around the Italian P11 format, so plug compatibility should be checked before ordering.

On board, it makes sense in dry interior spaces such as cabins, galleys, lockers, and other protected areas. It is a 250V AC fitting, not a 12V or 24V DC device, and the IP20 rating means it is not intended for exposed deck or washdown locations.

Key features

• 2P+E outlet format with 10A current rating and 250V AC nominal voltage.
• Italian standard P11 socket configuration for matching plugs and equipment built to that format.
• Straight axial cable entry keeps the lead aligned with the outlet body.
• Screwed terminal connection for secure conductor termination during assembly or replacement work.
• Thermoplastic construction that is halogen free, with IP20 protection for protected interior use.
• Available in black or white to match surrounding switchgear and interior finishes.

Variants

This outlet is offered in two colour configurations.

The electrical format stays the same across both versions: each one is a 2P+E 10A 250V AC P11 axial outlet with straight cable entry, screw terminals, thermoplastic construction, halogen-free material, and IP20 protection. The difference between the variants is the exterior colour.

• VM01023: Black. This finish sits well with darker switch panels, trim, and interior details where a less visible outlet body is preferred.
• VM01023.B: White. This finish blends more easily into lighter cabin and galley interiors and stands out more clearly in lockers or utility spaces.

Compatibility and fit

Before fitting this outlet, confirm that the mating plug uses the Italian P11 standard and that the circuit is a 250V AC service within the 10A rating. Because this is a portable axial outlet, it is suited to cable-end assembly and replacement work rather than flush mounting into a wall or panel.

Installation and use

The straight cable path is useful where the lead runs directly away from the outlet without a side exit. The screw terminal layout also makes it practical for maintenance jobs when an existing inline outlet has worn contacts, cracked housing, or needs to be replaced during a refit.

This is a sensible match for boats that already use Italian-standard accessories in protected interior areas, and for owners or electricians who need a clean replacement outlet without changing the plug standard elsewhere in the system.