Transducer Extension Cables

OverviewThe Garmin 010-11613-10 is a wire block adapter that lets you connect a compatible bare wire transducer to a Garmin 12-pin sounder connector. It gives you a clean place to terminate transducer conductors inside a compact adapter box, then runs to...

OverviewThe Garmin 010-12122-10 is an adapter cable that lets you connect an 8-pin transducer with XID to a Garmin 12-pin sonar port.It is commonly used when you are upgrading a chartplotter, fishfinder, or sonar module but want to keep an existing 8-pin...

OverviewThe Garmin 010-12234-05 is a 12-pin to dual 4-pin transducer Y-cable that connects a compatible 12-pin transducer to a compatible Garmin device that uses 4-pin transducer inputs.It is used when the transducer you want to run terminates in...

OverviewThe Garmin 010-11057-00 is a twist-lock ECU power cable for the GHP 10 marine autopilot system, used to bring battery power to the Electronic Control Unit.One end has a locking-ring connector that mates to the ECU, and the other end is bare-wire...

OverviewThe Garmin 010-11617-10 is a 10 ft (3 m) 4-pin transducer extension cable that adds extra reach between a compatible Garmin transducer and your sonar unit.It comes in handy when the transducer lead is just a little short after routing through a...

OverviewThis Garmin NMEA 2000 backbone/drop and power cable is used to extend a NMEA 2000 network, either by adding length to the backbone between T-connectors or by making a drop connection from a device to a T-connector. Cable lengths in this range...

OverviewThe Simrad 000-14923-001 is a 5 m (16.5 ft) extension cable for a compatible Simrad VHF fist microphone or handset, adding extra reach between the control at the helm and the radio body. It is commonly used when the VHF is mounted inside a...