Overview

The Vimar Eikon 20654 is a 4-module Classic cover plate for finishing Eikon switches, outlets, and control modules on board. It measures 142.30 mm wide by 84.80 mm high with an 8.90 mm depth, so it fits standard 4-module Eikon installations on bulkheads, furniture panels, and electrical boards.

It can be mounted horizontally or vertically and uses clamp mounting to the matching Eikon 4-module frame/support, commonly paired with Vimar 21614. The front includes a label space so you can mark circuits, which helps when several controls are grouped together at the nav station, cabin entry, or a main switch panel.

This plate is rated IP00, meaning it is a finishing part and does not add sealing. Plan to install it in protected interior locations or inside an enclosure when the area can see spray, washdowns, or heavy condensation.

Key features

• 4-module Classic cover plate format for Vimar Eikon devices
• Overall size: 142.30 x 84.80 mm; depth 8.90 mm
• Mounting direction can be horizontal or vertical
• Clamp mounting to a 4-module Eikon frame/support (often used with Vimar 21614)
• Suitable for built-in installations, wall ducts, and floor boxes when used with the appropriate Eikon hardware
• Label space/information surface for clear circuit identification
• IP00 finishing plate; no environmental sealing added at the faceplate

Variants

This cover plate is offered in a range of finishes so you can keep a consistent look across cabins, heads, and technical spaces while still matching surrounding trim. Options include light and dark metallic tones, chrome and black chrome looks, several silver and anthracite finishes, gold tones, and Arctic white.

Some variants use a metal front with different surface treatments, while the Africain Wengé option uses a solid wood front with a chromed frame. Across the 20654 format, the plate remains a 4-module Classic cover plate in the same overall footprint.

Compatibility and fit

This cover plate matches Vimar Eikon installations that use the 4-module format. Confirm your underlying support/frame is the Eikon 4-module type and that your devices line up as four modules across before ordering a finish.

Installation and setup

Since this is installed over electrical devices, isolate power to the circuit before removing an existing plate. Fit the plate onto the installed 4-module support and engage the clamp mounting evenly so it sits flat without rocking, which matters on boats where panels can flex with vibration.

Use cases on board

This plate is a good match for refits and new builds that standardize on Vimar Eikon devices in visible areas such as the salon, galley, cabins, and nav station. It also helps keep service areas organized when the label space is used to mark pumps, lighting zones, or auxiliary loads.

Maintenance and care

Wipe with a soft cloth and mild cleaner. Avoid abrasive pads or aggressive solvents that can dull plated and painted finishes, and keep standing moisture from sitting around the edges of the plate.